BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Global Dynamic Systems (GDS) Engineering R&D - ECPv6.15.12.2//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Global Dynamic Systems (GDS) Engineering R&D
X-ORIGINAL-URL:https://www.globaldynamicsystems.com
X-WR-CALDESC:Events for Global Dynamic Systems (GDS) Engineering R&D
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20240101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Helsinki
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20220327T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20221030T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20230326T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20231029T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20240331T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20241027T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Paris
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20210328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20211031T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20220327T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20221030T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20230326T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20231029T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260903T080000
DTEND;TZID=America/New_York:20260905T113000
DTSTAMP:20260919T224603
CREATED:20241204T135930Z
LAST-MODIFIED:20260717T092311Z
UID:5289-1788422400-1788607800@www.globaldynamicsystems.com
SUMMARY:MIL-STD-461G Training:  EMI/EMC Testing of Military Equipment [Online/Live]
DESCRIPTION:Two and a half days of Online Training with US Time Schedule CDT\, UTC-5) \n\n\n\nMIL-STD-461G\, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.\n\n\n\nAn International ONLINE Training on EMI/EMC Testing with focus on:  \n\n\n\nMIL-STD-461G\, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.\n\n\n\nIncludes Overview of Relevant EMI/EMC Test Standards (MIL-STD-464\, MIL-STD-704\, MIL-STD-1275\, and RTCA-DO-160G Power Input)  \n\n\n\nThis training is an important step for testing your military equipment for Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) for the targeted test requirements described in MIL-STD-461G and platform requirements described in MIL-STD-464D. The training focuses on the test sections described in these standard documents: \n\n\n\n“MIL-STD-461G: Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment” and “MIL-STD-464D Electromagnetic Environmental Effects\, Requirements for Systems.” \n\n\n\nThe Instructors share their experience and knowledge gained by working long years in the field designing products and performing tests following such as MIL-STD-810H\, RTCA-DO-160\, and MIL-STD-461G. The slides are supported by many graphics and test videos for the efficiency and clarity of the information and each session is planned under the tests described in MIL-STD-461G. Sessions include presentations on platform-level requirements\, guides\, and lessons learned items based on MIL-STD-464D. The training also includes test process and requirements overview given by DOD Systems Engineering Processes. Dr. Ismail Cicek is the lead instructor of this training\, and several experienced test personnel and design engineers helped complete the training sessions. The following link describes Dr. Cicek’s experiences on the topic in more detail: https://www.globaldynamicsystems.com/dr-i-cicek/ \n\n\n\nPurpose of the Training\n\n\n\nThe main goal of this training is to provide a good understanding of equipment testing in accordance with the MIL-STD-464G standard document. The attendees completing this training are expected to have knowledge in the following areas: \n\n\n\n\nUnderstand MIL-STD-461G Standard Test Sections and Test Procedures\n\n\n\nUnderstand the MIL-STD-464D platform level requirements and additional material provided\n\n\n\nBe able to write a list of susceptibilities\n\n\n\nUnderstand the test process goals and activities\n\n\n\nDevelop test plans\, and schedule tests\n\n\n\nExecute tests\n\n\n\nUnderstand test results\n\n\n\nCreate test reports\n\n\n\nBe able to resolve issues in the test results by means of change recommendations\, or accepting the anomalies with risk assessment.\n\n\n\n\nTraining Method\n\n\n\n\nTraining Type: Online\n\n\n\nStatus: OPEN for Registration\n\n\n\nOnline training using ZOOM.\n\n\n\nLed by a live\, US-based instructor (Dr. Ismail Cicek) and a Certified Verification Engineer (FAA/EASA) with EE Active Chief Engineer\n\n\n\n2.5 days of training schedule is as follows:\n\nDay 1: 08:00 – 11:30 | 13:00 – 16:30\n\n\n\nDay 2:  08:00 – 11:30 | 13:00 – 16:30\n\n\n\nDay 3:  08:00 – 11:30\n\n\n\nTime zone: US Central Day Time (CDT) (UTC-5)\n\n\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English (US)\, including presentations and additional reference material.\n\n\n\nCommunications Language: English (US / International)\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning\n\n\n\n\nTraining Scope\n\n\n\nThe training sessions cover the following topics with annotated slides\, test photos\, videos\, and additional reference material from standards\, specifications\, and FAA/EASA guides and documents: \n\n\n\n\nSystems Engineering Process Overview and Test & Evaluation (T&E): Important Concepts\, such as Product Development and V&V Processes\, Test Requirements\, Requirements Management\, Environmental Profile\, and Mission Profile.\n\n\n\nUnderstanding the Purpose of the Tests\n\n\n\nTest Category Selections\n\n\n\nBe able to Select Tests in MIL-STD-461G based on the Targeted Platform\n\n\n\nDevelop a Susceptibilities List for Use in Test Plan and in Tests\n\n\n\nUnderstand Test Equipment\, Chambers\, and other Devices Use in Testing and Their Specifics\n\n\n\nTest Procedures and Other Technical Details for Running Tests\n\n\n\nScheduling and Implementation of the Tests\n\n\n\nReview of Test Reports for all Test Procedures\n\n\n\nDesign Issues\, Discussion of Test Failures\, and Recommendations\n\n\n\nRisk Management Process based on MIL-STD-882E\n\n\n\nAdditional or Discussions with Other Standards and Test Recommendations\n\n\n\n\nTraining Material\n\n\n\nThe instructors present the topics using the presentation slides with references to MIL-STD-461G and MIL-STD-461D sections and contents with the inclusion of information included from relevant regulations\, standards\, and specifications. The lecturers provide slides for sharing their own experience and knowledge gained by working long years in the field and performing tests in accordance with RTCA-DO-160\, MIL-STD-810\, and MIL-STD-461. The slides are supported by many graphics and test videos for the efficiency and clarity of the information. \n\n\n\nThe slides and other sharable course material will be shared with the registered students before the class using GOOGLE DRIVE. \n\n\n\n\nRegistration includes all presentations and additional material shared before the class.\n\n\n\n\nThe RTCA-DO-160G standard must be purchased separately through RTCA\, Inc. website at https://www.rtca.org/standards/publications/. \n\n\n\nAbout the Instructors\n\n\n\nThe main instructor of the training is Dr Ismail Cicek. He gained engineering and leadership experience by working for 15 years. He led the development of various platform engineering systems\, including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft. An Avionics Chief Engineer (EE)and a Certified Verification Engineer (FAA/EASA) also assist with the training. Our experienced test personnel also become available for demonstrations and discussions. A Certified Verification Engineer (CVE) in FAA/EASA with 18 years of experience. He has worked as the chief engineer of avionics systems in product development. He is also experienced in product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nDr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Click here to read more about Dr Cicek’s professional studies. Connect with Dr Ismail Cicek on the Linkedin page. \n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\n\nMore Information and Contents of the Training\n\n\n\nClick to read all the details about this training.
URL:https://www.globaldynamicsystems.com/event/mil-std-461g-training-emi-emc-testing-of-military-equipment-online-live250203u/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:MIL-STD-461G EMI/EMC Training
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/Online-Training-on-MIL-STD-461G-Live-Design-Items-Included.png
ORGANIZER;CN="GDS Training Institute (US)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260729T083000
DTEND;TZID=America/New_York:20260731T123000
DTSTAMP:20260919T224603
CREATED:20241203T144146Z
LAST-MODIFIED:20260623T083841Z
UID:5186-1785313800-1785501000@www.globaldynamicsystems.com
SUMMARY:RTCA-DO-160G: Environmental and EMI/EMC Testing of Airborne Equipment Training
DESCRIPTION:2.5 Days\, Hands-on\, “Online” or “Onsite” Training Class. Led by live\, two instructors.\n\n\n\n\n\n\n\n\n\nTime Schedule: US Central Daytime (CDT\, UTC-5) \n\n\n\nInternational Training with a focus on the test standard document“RTCA-DO-160G Environmental Conditionsand Test Procedures for Airborne Equipment© 2010\, RTCA\, Inc.” \n\n\n\nThis training is an important step fortesting and certifying your products in accordance with the FAA/EASA test requirements. \n\n\n\n\nGDS Engineering R&D\, Inc. is an official member of the RTCA Organization. \n\n\n\n\nRTCA-DO-160G Online Training\, FAA/EASA Equipment Test Requirements. This training is an important step for testing and certifying your products in accordance with the FAA/EASA test requirements. \n\n\n\nOur Instructors share their experience and knowledge gained by working long years in the field with designing products and performing tests in accordance with such as RTCA-DO-160\, MIL-STD-810\, and MIL-STD-461. The slides are supported by many graphics and test videos for the efficiency and clarity of the information and each session is planned in accordance with the sections in RTCA-DO-160G. \n\n\n\nTraining Plan\n\n\n\n\nTraining Type: International / Online\n\n\n\nSatus: Seats are avaiable.\n\n\n\nOnline training using ZOOM.\n\n\n\nLed by a live\, US-based instructor (Dr Ismail Cicek)\n\n\n\n2.5 days of training schedule is as follows:\n\nDay 1: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 2: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 3: 08:30 – 12:00\n\n\n\nTime zone: US Central Daytime (CDT\, UTC-5)\n\n\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English (US)\, including presentations and additional reference material.\n\n\n\nCommunications Language: English (US)\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning\n\n\n\n\nSummary Information\n\n\n\n\nA good understanding of product testing in view of RTCA-DO-160G\n\n\n\nOverview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document and relations with RTCA-DO-160 testing\n\n\n\nPart 21 and FAA/EASA Regulations\n\n\n\nTest Requirement Reference\n\n\n\nTest Category Selections\n\n\n\nTest Procedures\, Scheduling\, Test Implementation and Review of Test Reports\n\n\n\nTest Sections (Environmental & EMI/EMC): All test sections are covered with detail discussions except several tests\, such as Fungus Tesing and Waterproofness are discussed in summary with important aspects.\n\n\n\nDiscussions include design issues\, test failures\, and recommendations\n\n\n\nA session with Risk Management Method includes how to resolve a test result that may not be a failure\, i.e. anomalies.\, with a process that we recommend.\n\n\n\nImportance of establishing Integrated Product Team (IPT) or with another name “Test Review Team” for reviewing test plans and results and identifying the next step when issues are encountered.\n\n\n\nDesign Recommendations are emphasized in each test section.\n\n\n\nAdditional or alternative (standards and tests) are recommended for certain cases.\n\n\n\n\nAbout the Instructors\n\n\n\nThe main instructor of the training is Dr Ismail Cicek. He gained engineering and leadership experience by working for 15 years. He led the development of various platform engineering systems\, including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft. An Avionics Chief Engineer (EE)and a Certified Verification Engineer (FAA/EASA) also assist with the training. Our experienced test personnel also become available for demonstrations and discussions. A Certified Verification Engineer (CVE) in FAA/EASA with 18 years of experience. He has worked as the chief engineer of avionics systems in product development. He is also experienced in product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nDr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Click here to read more about Dr Cicek’s professional studies. Connect with Dr Ismail Cicek on the Linkedin page. \n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\n\nMore Information and Contents of the Training\n\n\n\nClick to read all the details about this training.
URL:https://www.globaldynamicsystems.com/event/rtca-do-160g-training-on-environmental-and-emi-emc-testing-of-airborne-equipment-faa-easa-test-requirements-online-live-250102u/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:RTCA-DO-160G Training,Systems Engineering Training Courses,Systems Engineering Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2022/02/GDS-RTCA-DO-160G-Training-Program-Banner.png
ORGANIZER;CN="GDS Training Institute (US)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20251119T083000
DTEND;TZID=UTC:20251121T123000
DTSTAMP:20260919T224603
CREATED:20241203T145106Z
LAST-MODIFIED:20260706T074923Z
UID:5194-1763541000-1763728200@www.globaldynamicsystems.com
SUMMARY:Reliability Enginering  | Online/Live [250402G]
DESCRIPTION:Time Schedule: Central European Time (CET\, UTC+1)Day 1 and 2: 08:30 – 11:30   |   12:30 – 16:30  Day 3: 08:30 – 12:00 \n\n\n\n\n\nReliability engineering is a sub-discipline of systems engineering that emphasizes the ability of equipment to function without failure. Reliability is the probability that a product\, system\, or service will perform its intended function adequately for a specified period OR operate in a defined environment without failure. Reliability is closely related to availability\, which is typically described as the ability of a component or system to function at a specified moment or interval of time. \n\n\n\n\n\n\n\n\n\n\n\nTraining Plan\n\n\n\n\nTraining Type: International / Online\n\n\n\nSatus: Seats are avaiable.\n\n\n\nOnline training using ZOOM.\n\n\n\nTwo instructors lead the training from QVISE and GDS.\n\n\n\n2.5 days of training schedule is as follows:\n\nDay 1: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 2: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 3: 08:30 – 12:00\n\n\n\nTime zone: Central European Time (CET) (UTC+1)\n\n\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English\, including presentations and additional reference material.\n\n\n\nCommunications Language: English\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning.\n\n\n\n\nOur Reliability\, Integrated Product Support (IPS)\, IPS/ILS/Reliability) courses are certified courses are certification training courses conducted by Quality Vertex Integrated Systems Engineering (QVISE)\, Global Dynamic Systems\, Inc.\, and GDS Engineering R&D\, Inc. international collaboration. You can register for two weeks for all modules OR register only for the module(s) you have an interest. All course instructors are international experts\, led by Dr Ismail Cicek. \n\n\n\nHighlights of the Training\n\n\n\n\nThe Reliability Engineering Courses are focused to provide individuals with a complete run-down of all the basics of a Reliability Program\, with a solid foundation.\n\n\n\nThe program is structured into eight (8) distinct modules designed to be thorough yet concise.\n\n\n\nOur curriculum is carefully designed to align with military standards and best practices\, ensuring that participants gain a deep understanding of Reliability Engineering principles\, processes\, and implementation techniques.\n\n\n\nUpon successful completion of the program\, learners will demonstrate a basic level expertise of Reliability Engineering concepts & strategies.\n\n\n\nKeywords of this training: Reliability | Reliability Modeling & Prediction | Availability | CBM | LORA | FMECA | FRACAS | Root-Cause | Event Tree Analysis | Block Diagrams | Relability Growth | ESS | LCCA | Reliability Qualification | Reliability Governence | Parts Management | Obselesence Management | Military Standards | Safety & Risk Assessment\n\n\n\n\nLive Demosntrations with FALCON Software\n\n\n\nWhy You should choose “QVISE-GDS” for your ILS Training?\n\n\n\n\nBy choosing this QVISE-GDS Collaborative Training\, you gain the tools and expertise to optimize product reliability\, reduce failures\, and improve overall product life cycle performance.\n\n\n\nWe offer exceptional Reliability Engineering training to empower professionals to enhance product performance and durability.\n\n\n\nOur expert instructors combine industry knowledge with practical experience to deliver comprehensive and engaging training programs.\n\n\n\nYou benefit from our hands-on approach\, real-world case studies\, and tailored curriculum to meet your specific reliability objectives.\n\n\n\n\nReliability Engineering Course Modules\n\n\n\nModule 1: Introduction to ILS/ IPS\, Reliability & Supportability EngineeringModule 2: Reliability Governance & Contractual ManagementModule 3: Reliability Program Reviews & Failure Review Board (FRB)Module 4: Reliability Modeling & AllocationModule 5: Reliability PredictionModule 6: Failure Modes\, Effects & Criticality Analysis (FMECA) and Failure Reporting Analysis & Corrective Action System (FRACAS)Module 7: Reliability Growth (RGT) & Environmental Stress Screening (ESS)Module 8: Reliability Qualification & Production Reliability Acceptance Testing (RQT & PRAT) \n\n\n\nMore information: Click to read all details about this training. \n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com
URL:https://www.globaldynamicsystems.com/event/reliability-enginering/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:Reliability Engineering,Systems Engineering Training Courses,Systems Engineering Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2024/12/image-3.png
ORGANIZER;CN="GDS Training Institute (EU)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250516T090000
DTEND;TZID=UTC:20250518T123000
DTSTAMP:20260919T224603
CREATED:20241206T135906Z
LAST-MODIFIED:20250526T104357Z
UID:5372-1747386000-1747571400@www.globaldynamicsystems.com
SUMMARY:Applied Vibration Testing\, Hands-on Training [Face-To-Face\, In-Laboratory Training]
DESCRIPTION:Hands-On Training on Vibration Tests According to Military and Civil Test Standards \n\n\n\nVibration tests are one of the most difficult sections to understand in MIL-STD-810 and RTCA-DO-160 test standards. There are many tests depending on the platform and transportation modes to be applied. Dr. Ismail Cicek and his team at Istanbul Technical University Maritime Test Equipment Center (ITU METC) in the Tuzla Campus of Istanbul Technical University give applied vibration test training. The trainings that cover the tests specified in MIL-STD-810H and RTCA-DO-160G include theoretical and application sections using vibrators. Application sections include periodic and efficiency test envelopes and mechanical shock profiles selected from military and civil standards. These are entered into the vibration test system\, test execution\, and results evaluation exercises. \n\n\n\nShock test profiles are discussed theoretically\, and tests are demonstrated with various selected durations\, amplitudes (G)\, and shaker profiles. All tests are discussed and applied on a shaker table to understand the test parameters better. \n\n\n\nScope of Training and Summary Topics\n\n\n\n\nSystems Engineering: Vibration Test Problems\n\n\n\nDesign Stage\, Environmental Vibration Testing\, Monitoring Vibrations for Equipment in Use\, Vibration Limits\n\n\n\nEnvironmental testing and vibration\n\n\n\nVibration test setup and test parameters\n\n\n\nTest applications.\n\n\n\nPeriodic vibrations: dwell tests\, sweep tests\, determination of critical frequencies – test parameters entry into a shaker\n\n\n\nResonance frequencies and vibration mode shapes – test demonstrations\n\n\n\nRandom vibrations: broadband\, narrowband\, sine-on-random\, random-on-random – test parameters entry into a shaker\n\n\n\nMIL-STD-810H Method 514 Vibration Test Profiles\n\n\n\nRTCA-DO-160G Vibration Test Profiles.\n\n\n\nMechanical Shock Test Profiles\, shock test parameters and shaker test demonstrations\n\n\n\nNAVMAT Test profile\n\n\n\n\nHighlights of the Training\n\n\n\n\nTraining Type: International / Face-to-Face\n\n\n\nLocation: Istanbul Technical University. Maritime Faculty. ITU Marine Equipment Test Center (METC). Test Laboratory. Tuzla\, Istanbul.\n\n\n\nLed by a live\, US-based instructor (Dr Ismail Cicek)\n\n\n\nA usual 2.5 days of training schedule is as follows:\n\n\n\nDay 1: 09:00 – 12:30 | 12:30 – 16:30\n\n\n\nDay 2: 09:00 – 12:30 | 12:30 – 16:30\n\n\n\nDay 3: 09:00 – 12:30\n\n\n\nTime zone: Central European Summer Time (CEST+1)\, (UTC+3)\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes presentations\, test demonstrations\, knowledge check quizzes\, and a competition-type fun way of learning.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nAbout the Instructors\n\n\n\nThe primary instructor of the training is Dr Ismail Cicek. He completed his PhD in Mechanical Engineering at Texas Tech University in 1999. His Ph.D was on the Random Vibration. He investigated a passive vibration test absorber theoretically and experimentally. He gained engineering and leadership experience by working for 15 years. He led the development of various platform engineering systems\, including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft. An Avionics Chief Engineer (EE)and a Certified Verification Engineer (FAA/EASA) also assist with the training. Our experienced test personnel also become available for demonstrations and discussions. A Certified Verification Engineer (CVE) in FAA/EASA with over 20 years of experience. He has worked as the chief engineer of avionics systems in product development. He is also experienced in product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nDr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed the Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Click here to read more about Dr Cicek’s professional studies. Connect with Dr Ismail Cicek on the LinkedIn page. \n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\n\nMore Information\n\n\n\nClick this link to read details about the Applied Vibration Testing training\, including contents\, sessions\, and about the instructors.)
URL:https://www.globaldynamicsystems.com/event/applied-vibration-testing-hands-on-training-itu-metc-face-to-face-in-laboratory-training/
LOCATION:ITU METC\, Tuzla\, Istanbul\, Postane Mah. Sahilyolu Cad.\, Tuzla\, 94340
CATEGORIES:Systems Engineering Training Courses,Systems Engineering Training Courses (Open),Vibration Testing
ATTACH;FMTTYPE=image/jpeg:https://www.globaldynamicsystems.com/wp-content/uploads/2024/12/Applied-Vibration-Testing-810H-DO160-Hands-on-Face-to-Face.jpg
ORGANIZER;CN="GDS Training Institute (EU)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250430T080000
DTEND;TZID=UTC:20250502T120000
DTSTAMP:20260919T224603
CREATED:20221229T110343Z
LAST-MODIFIED:20250314T123752Z
UID:4268-1746000000-1746187200@www.globaldynamicsystems.com
SUMMARY:MIL-STD-461G EMI/EMC Online Training [EU EST Timezone]
DESCRIPTION:MIL-STD-461G Training on the EMI/EMC Testing of Military Equipment [Online/Live]\, with focus on: \n\n\n\nMIL-STD-461G\, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.\n\n\n\nIncluding the overview of the relevant EMI/EMC test standards: MIL-STD-464\, MIL-STD-704\, MIL-STD-1275\, and RTCA-DO-160G Power Input.  \n\n\n\nTraining Type: International / OnlineSatus: OPENDate: 30 April – 2 May\, 2025 | Timezone: EST (European Standart Time) UTC+1.Time: Day1/2: 08:30 – 16:30\, Day 3: 08:00 – 12:00. \n\n\n\nClick here to read all details about MIL-STD-461G training with detailed contents) \n\n\n\n\nTraining Type: International / Online\n\n\n\nSatus: Seats are avaiable. Early bird (1-month in advance) registrations will receive 10% discount.\n\n\n\nOnline training via ZOOM.\n\n\n\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\n\n\n\nA usual 2.5 days of training schedule is as follows:\n\nDay 1: 08:00 – 11:30 | 13:00 – 16:30\n\n\n\nDay 2: 08:00 – 11:30 | 13:00 – 16:30\n\n\n\nDay 3: 08:00 – 11:30\n\n\n\nTime zone: EST (European Standart Time). UTC+1\n\n\n\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English | Comm. Language: English\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nAttendees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\nTraining Contents\n\n\n\n2.5 days of training covers the following topics: \n\n\n\n\nEMI/EMC Training\, Opening Session\n\nGeneral understanding of EMI and EMC.\n\n\n\nIntroductory Design Considerations: Grounding\, Bonding\, and Shielding.\n\n\n\n\n\nMIL-STD-461G Standard General OverviewIntroduction & History\n\nMIL-STD-461: General overview\, definitions\, nomenclature\, purposes\, language\, and scope\n\n\n\nMIL-STD-461 Contents Overview\n\n\n\nGeneral and detailed requirements\n\n\n\nSelection of test methods and procedures based on the platform and equipment type\n\n\n\n\n\nMIL-STD-461G – CE Tests (Part I)\n\nConducted Emissions Test Methods CE101\, CE102\, CE106\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL-STD-461-G – CE Tests (Part II)\n\nConducted Emissions Test Methods CE101\, CE102\, CE106\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL STD 461G – CS Tests (Part I)\n\nConducted Susceptibility Test Methods CS101\, CS103\, CS104\, CS105\, CS109\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL STD 461G – CS Tests (Part II)\n\nConducted Susceptibility Test Methods CS114\, CS115\, CS116\, CS 117\, CS 118\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nProduct Development and Certification ProcessUS DOD Systems Engineering V&V Processes\, R&D Project vs. End Product\n\nCertification Process (MIL-STD-461\, MIL-STD-464\, MIL-HDBK 516\, US DOD )\n\n\n\nUSAF and US Army EMI/EMC Test and Certification Process\n\n\n\nFAA/EASA Part 21 ve Certification Process\n\n\n\n\n\nDocumentation\, Test Plans\, and Test Reports\n\nTest Plan Examples\n\n\n\nTest Results and Risk Assessment\n\n\n\nTest Reports\n\n\n\nUS DOD Data Items (DI) Forms and Data Item Descriptions (DID)\, governmental and non-governmental documentation\n\n\n\n\n\nMIL-STD-464 Standard\n\nMIL-STD-461 vs MIL-STD-464\n\n\n\nEMI/EMC Platform Level Requirements Review\n\n\n\nMIL-STD-464 Guides: Requirements Rationale and Lessons Learnt Items\n\n\n\n\n\nMIL-STD-461G RS Tests\n\nRadiated Susceptibility Test Methods RS101\, RS103\, RS105\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL-STD-461G RE Tests\n\nRadiated Emissions Test Methods  RE101\, RE102\, RE103\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nEMI/EMC & Equipment Design\n\nEMI/EMC and Equipment Design\n\n\n\nEMI/EMC Analysis Software Programs and Application Examples\n\n\n\nEMI/EMC Analysis Test Programs\n\n\n\n\n\nAdditional Tests (RTCA-DO-160)\n\nPower Input\, RTCA-DO-160G Section 16\n\n\n\nMagnetic Effect\, RTCA-DO-160G Section 15\n\n\n\nLightning Direct Effects\, RTCA-DO-160G Section 23\n\n\n\n\n\nOther Relevant Test Standards\, Brief SummaryMIL-STD-464D Electromgnetic Environmental Effects\, Requirements for SystemsMIL-STD-704F Aircraft Electric Power Characteristics\n\nMIL-STD-1275E Interface Standard\, Characteristics of 28 Volt DC Input Power to Utilization Equipment in Military Vehicles\n\n\n\nMIL-STD-1399 Interface Standard\, Section 300\, Part 1 Low Voltage Electric Power\, Alternating Current\n\n\n\nMIL-STD-1399 Interface Standard\, Section 300\, Part 2 Medium Voltage Electric Power\, Alternating Current\n\n\n\n\n\n\nAll MIL-STD-461G test sections are discussed and explained in detail\, includingThe Purpose of the TestTest Configurations and General RequirementsTest Requirements and Procedures \n\n\n\n\nEMI Test Chamber\n\n\n\nTest Setup: Test Setup (Tabletop) / Test Setup (Free Standing)\n\n\n\nMeasurement Tolerances\n\n\n\nInterpretation of the Test Results and Example Test Report Reviews\n\n\n\nIssues that might be observed with recommendations (based on design experience).\n\n\n\n\nInstructors\n\n\n\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\nMore Information\n\n\nPlease enable JavaScript in your browser to complete this form.		\n			the Name insterested\n			\n		\n		Name *FirstLastEmail *Type in the information for the training you are insterested in: *Please provide us your training interest with enough information\, for example\, the training name and date of the training.\n\nFor Individual Training\, type in the training name and date of the training you would like to participate.\n\nFor group training requests and quotes\, please type\n– your interested training name\,\n– approximate number of  attendees\n– training type (online or face-to-face)\n\nPlease provide enough information for other training requests.\n \nThank you.Submit
URL:https://www.globaldynamicsystems.com/event/mil-std-461g-training-on-emi-emc-testing-of-military-equipment-online-live-international-english/
LOCATION:Online Training via ZOOM
CATEGORIES:MIL-STD-461G EMI/EMC Training,Systems Engineering Training Courses,Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/Online-Training-on-MIL-STD-461G-Live-Design-Items-Included.png
ORGANIZER;CN="GDS Training Institute (US)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231019T090000
DTEND;TZID=UTC:20231021T170000
DTSTAMP:20260919T224603
CREATED:20220716T153402Z
LAST-MODIFIED:20231116T195725Z
UID:4023-1697706000-1697907600@www.globaldynamicsystems.com
SUMMARY:MIL-STD-810H: Training on Environmental Testing of Military Equipment [Online/Live | International\, English]
DESCRIPTION:Training on MIL-STD-810H Environmental Testing \n\n\n\nwith Tailoring Examples\n\n\n\nA Hands-on “Online” or “Onsite” Training ClassLed by a live\, U.S. based instructor \n\n\n\nMIL-STD-810HUS Department Of Defence Test Method StandardEnvironmental Engineering Considerations and Laboratory Tests\n\n\n\nGDS Engineering R&D\, Inc. provides online international training on MIL-STD-810H Environmental qualification testing of military equipment. Training focuses on the standard with tailoring examples. This training is an important step for testing and certifying your military equipment and products in accordance with MIL-STD-810H\, platform test requirements\, and other applicable standards and specifications.  \n\n\n\nThis page describes the contents of this two and half days of short training.program.You can also download the PDF file that describes the MIL-STD-810H training program. Click here to download the MIL-STD-810H Training Program Description Document. Dr Cicek is the main instructor of this training. Click here to read his bio page. \n\n\n\n\n Training Scope and Contents\nA good understanding of product testing in view of MIL-STD-810G/H and other relevant military standards.Overview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document.Establishment of Test Requirements and Test Plans.Test Procedures\, Scheduling\, Implementation\, and Test Reports.Tests are covered in detail per MIL-STD-810. Altitude\, temperature\, humidity\, shock\, vibration\, acceleration\, salt fog\, explosive atmosphere\, etc..Some of the MIL-STD-810H test methods are covered briefly; however\, we ensure all questions are answered for each test method.Cases studies\, sample reports and discussions on issues.Design issues and test failure discussions.Risk management for test results and acceptance criteria.Design Recommendations.\n\n\n\n Platform and equipment test examples are provided in each test method presentations and discussions\, including:  \n\n\n\nMilitary aircraft platforms (fixed and rotary wing)\, ground vehicles\, and navy shipsAvionics\, electrical and mechanical systems\, and structural project applicationsTest tailoring examples to include the selection of tests\, parameter levels\, and durationsConcepts of Operations (CONOPS) document and test curve establishment.Tailoring and Life Cycle Environmental Profile (LCEP)Mission ProfileFor tailoring\, read more at https://www.globaldynamicsystems.com/posts/mil-std-810h-training-tailoring-is-essential-explained/ \n\n\n\n\n\n \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.\n\n\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.
URL:https://www.globaldynamicsystems.com/event/mil-std-810h-training-on-environmental-testing-of-military-equipment-online-live-international-en/
CATEGORIES:Systems Engineering Training Courses,Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2022/02/GDS-MIL-STD-810H-Training-Program-Banner-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Helsinki:20231005T090000
DTEND;TZID=Europe/Helsinki:20231007T170000
DTSTAMP:20260919T224603
CREATED:20220505T130726Z
LAST-MODIFIED:20231116T201143Z
UID:2158-1696496400-1696698000@www.globaldynamicsystems.com
SUMMARY:MIL-STD-461G: Training on EMI/EMC Testing of Military Equipment [Online/Live | International\, English]
DESCRIPTION:An International ONLINE Training on EMI/EMC Testing with focus on: \n\n\n\nMIL-STD-461G\, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.Includes Overview of Relevant EMI/EMC Test Standards (MIL-STD-464\, MIL-STD-704\, MIL-STD-1275\, and RTCA-DO-160G Power Input) \n\n\n\nTraining Type: International / OnlineSatus: OPENDate: 5-7 October 2023 | Timezone: US CDT\,  UTC-5Time: Day1: 09:00 – 13:00\, Day 2/3: 09:00 – 17:00.  \n\n\n\nClick here to read all details about this training (MIL-STD-461G).\n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.\n\n\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.  \n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″] \n\n\n\n\n\n\n\n\n\nSystems Engineering Specialized Online Training Courses
URL:https://www.globaldynamicsystems.com/event/mil-std-461g-online-training-on-emi-emc-testing-of-military-equipment/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/Online-Training-on-MIL-STD-461G-Live-Design-Items-Included.png
ORGANIZER;CN="GDS Engineering R&D (Global)":MAILTO:imfo@GlobalDynamicSystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220520T080000
DTEND;TZID=UTC:20220522T120000
DTSTAMP:20260919T224603
CREATED:20220219T124516Z
LAST-MODIFIED:20220505T131928Z
UID:3561-1653033600-1653220800@www.globaldynamicsystems.com
SUMMARY:RTCA-DO-160G Online Training on Environmental and EMI/EMC Testing of Airborne Equipment (FAA/EASA) (20-22 May 2022) | Online/Live | International (EN)
DESCRIPTION:Training Type: International / OnlineSatus: OPENCourse Material: EnglishComm. Language: EnglishDate: 20-22 May 2022Time Schedule: Day 1 and 2: 08:00 – 16:30\, Day 3: 08:00 – 12:00. Timezone: Central European Summer Time (CEST). UTC+2 \n\n\n\nTwo and a Half Days Online/Live International TrainingMay 20-21-22\, 2022Cost: USD760.00 \n\n\n\nTraining Content Details: Click to Display RTCA-DO-160 Training Contents Page. \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.\n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″]
URL:https://www.globaldynamicsystems.com/event/rtca-do-160g-online-training-on-environmental-and-emi-emc-testing-of-airborne-equipment-faa-easa-22-24-april-2022/
CATEGORIES:Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/Bombardier-RTCA-DO-160-Testing-Important-Step-for-Certification-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20220211T080000
DTEND;TZID=Europe/Paris:20220213T123000
DTSTAMP:20260919T224603
CREATED:20211230T112412Z
LAST-MODIFIED:20220208T181257Z
UID:2148-1644566400-1644755400@www.globaldynamicsystems.com
SUMMARY:RTCA-DO-160G: Training on Environmental and EMI/EMC Testing of Airborne Equipment (FAA/EASA Test Requirements) | Online/Live | International (EN)
DESCRIPTION:Cost: USD760.00 \n\n\n\n\n\n\nGDS Engineering R&D\, Inc. is an official member of the RTCA Organization. \n\n\n\n\nRTCA-DO-160G Online Training\, FAA/EASA Equipment Test Requirements. This training is an important step for testing and certifying your products in accordance with the FAA/EASA test requirements.\n\n\n\n2.5 Days\, Hands-on\, “Online” or “Onsite” Training Class. Led by live\, two instructors. \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\nClick to read detail information about this training:https://www.globaldynamicsystems.com/systems-engineering-training-courses/training-on-rtca-do-160g-testing/\n\n\n\nDowload the PDF File: RTCA-DO-160G Training Description.PDF\n\n\n\n\n\n\n\nHere is a Summary Information:\n\n\n\nInternational Training with a focus on the test standard document“RTCA-DO-160G Environmental Conditionsand Test Procedures for Airborne Equipment© 2010\, RTCA\, Inc.” \n\n\n\nThis training is an important step fortesting and certifying your products in accordance with the FAA/EASA test requirements.\n\n\n\nA good understanding of product testing in view of RTCA-DO-160GOverview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document and relations with RTCA-DO-160 testingPart 21 and FAA/EASA RegulationsTest Requirement ReferenceTest Category SelectionsTest Procedures\, Scheduling\, Test Implementation and Review of Test ReportsTest Sections (Environmental & EMI/EMC): All test sections are covered with detail discussions except several tests\, such as Fungus Tesing and Waterproofness are discussed in summary with important aspects.Discussions include design issues\, test failures\, and recommendationsA session with Risk Management Method includes how to resolve a test result that may not be a failure\, i.e. anomalies.\, with a process that we recommend.Importance of establishing Integrated Product Team (IPT) or with another name “Test Review Team” for reviewing test plans and results and identifying the next step when issues are encountered.Design Recommendations are emphasized in each test section.Additional or alternative (standards and tests) are recommended for certain cases.\n\n\n\nOur Instructors share their experience and knowledge gained by working long years in the field with designing products and performing tests in accordance with such as RTCA-DO-160\, MIL-STD-810\, and MIL-STD-461. The slides are supported by many graphics and test videos for the efficiency and clarity of the information and each session is planned in accordance with the sections in RTCA-DO-160G.\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.  \n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″]
URL:https://www.globaldynamicsystems.com/event/rtca-do-160g-training-on-testing-of-airborne-equipment-faa-easa/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/webp:https://www.globaldynamicsystems.com/wp-content/uploads/2021/12/Mitigate-your-risks-before-they-actually-happen-MIL-STD-810H-Training-STD-461-RTCA-DO-160G-1.webp
ORGANIZER;CN="GDS Engineering R&D (Global)":MAILTO:imfo@GlobalDynamicSystems.com
END:VEVENT
END:VCALENDAR