BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Global Dynamic Systems (GDS) Engineering R&D - ECPv6.15.12.2//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Global Dynamic Systems (GDS) Engineering R&D
X-ORIGINAL-URL:https://www.globaldynamicsystems.com
X-WR-CALDESC:Events for Global Dynamic Systems (GDS) Engineering R&D
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20220101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Paris
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20210328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20211031T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20220327T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20221030T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20230326T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20231029T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20240331T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20241027T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Helsinki
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20220327T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20221030T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20230326T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20231029T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20240331T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20241027T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Halifax
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20220313T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20221106T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20230312T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20231105T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20240310T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20241103T050000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Moscow
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0300
TZNAME:MSK
DTSTART:20210101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20250712T083000
DTEND;TZID=UTC:20250716T163000
DTSTAMP:20260404T093531
CREATED:20250312T141659Z
LAST-MODIFIED:20250526T110233Z
UID:5998-1752309000-1752683400@www.globaldynamicsystems.com
SUMMARY:IPS/ILS and Reliability Engineering Training [Online]
DESCRIPTION:Platform Management Certification Training – Week 2: Integrated Product Support (IPS)\, Integrated Logistics Support (ILS)\, and Reliability Engineering Training [Online]\n\n\n\n\n\nIntegrated Product Support (IPS)\, Integrated Logistics Support (ILS)\, Systems\, Engineering\, and Reliability Engineering courses are certification training courses conducted by Quality Vertex Integrated Systems Engineering (QVISE)\, Global Dynamic Systems\, Inc.\, and GDS Engineering R&D\, Inc. through international collaboration. You can register for two weeks for all modules OR register only for the module(s) you have an interest in. All course instructors are international experts\, led by Dr Ismail Cicek. \n\n\n\n\n\n\n\nTraining CourseDurationScheduleIPS and ILS2.5 daysDay 1: 8:30 – 12:00 | 13:00 – 16:30Day 2: 8:30 – 12:00 | 13:00 – 16:30Day 3: 8:30 – 12:00Reliability Engineering2.5 daysDay 1: 13:00 – 16:30Day 2: 8:30 – 12:00 | 13:00 – 16:30Day 3: 8:30 – 12:00 | 13:00 – 16:30\n\n\n\nIPS/ILS Training Modules\n\n\n\nModule 1: Introduction to Integrated Product Support (IPS) and Integrated Logistics Support (ILS)Module 2: Product Support Analysis (PSA) InsightModule 3: Life Cycle Costing (LCC)\, Availability\, and Maintainability AnalysisModule 4: Logistics Product Data (LPD)Module 5: Synergizing Maintenance StrategiesModule 6: Level Of Repair Analysis (LORA)\, Producibility\, and Supportability AssessmentModule 7: Supply Support\, Provision & Obsolescence ManagementModule 8: Packaging\, Handling\, Storage\, & Transport (PHS&TModule 9: ILS / IPS Contact Management \n\n\n\nRead the details on the IPS/ILS Training using the following link: https://www.globaldynamicsystems.com/ips-ils-training/ \n\n\n\nReliability Engineering Training Modules\n\n\n\nModule 1: Introduction to Reliability & Supportability EngineeringModule 2: Reliability Governance & Contractual ManagementModule 3: Reliability Program Reviews & Failure Review Board (FRB)Module 4: Reliability Modeling & AllocationModule 5: Reliability PredictionModule 6: Failure Modes\, Effects & Criticality Analysis (FMECA) and Failure Reporting Analysis & Corrective Action System (FRACAS)Module 7: Reliability Growth (RGT) & Environmental Stress Screening (ESS)Module 8: Reliability Qualification & Production Reliability Acceptance Testing (RQT & PRAT) \n\n\n\nRead the details on the Reliability Engineering Training using the following link: https://www.globaldynamicsystems.com/training-on-reliability-engineering/ \n\n\n\n\n\nThe registration cost for one training session (2.5 days) is 1450 USD. Early bird registrations (earlier than one month before the training) will receive a 10% discount.
URL:https://www.globaldynamicsystems.com/event/platform-management-certification-training-week-2-integrated-product-support-ips-integrated-logistics-support-ils-and-reliability-engineering-online/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250516T090000
DTEND;TZID=UTC:20250518T123000
DTSTAMP:20260404T093531
CREATED:20241206T135906Z
LAST-MODIFIED:20250526T104357Z
UID:5372-1747386000-1747571400@www.globaldynamicsystems.com
SUMMARY:Applied Vibration Testing\, Hands-on Training [Face-To-Face\, In-Laboratory Training]
DESCRIPTION:Hands-On Training on Vibration Tests According to Military and Civil Test Standards \n\n\n\nVibration tests are one of the most difficult sections to understand in MIL-STD-810 and RTCA-DO-160 test standards. There are many tests depending on the platform and transportation modes to be applied. Dr. Ismail Cicek and his team at Istanbul Technical University Maritime Test Equipment Center (ITU METC) in the Tuzla Campus of Istanbul Technical University give applied vibration test training. The trainings that cover the tests specified in MIL-STD-810H and RTCA-DO-160G include theoretical and application sections using vibrators. Application sections include periodic and efficiency test envelopes and mechanical shock profiles selected from military and civil standards. These are entered into the vibration test system\, test execution\, and results evaluation exercises. \n\n\n\nShock test profiles are discussed theoretically\, and tests are demonstrated with various selected durations\, amplitudes (G)\, and shaker profiles. All tests are discussed and applied on a shaker table to understand the test parameters better. \n\n\n\nScope of Training and Summary Topics\n\n\n\n\nSystems Engineering: Vibration Test Problems\n\n\n\nDesign Stage\, Environmental Vibration Testing\, Monitoring Vibrations for Equipment in Use\, Vibration Limits\n\n\n\nEnvironmental testing and vibration\n\n\n\nVibration test setup and test parameters\n\n\n\nTest applications.\n\n\n\nPeriodic vibrations: dwell tests\, sweep tests\, determination of critical frequencies – test parameters entry into a shaker\n\n\n\nResonance frequencies and vibration mode shapes – test demonstrations\n\n\n\nRandom vibrations: broadband\, narrowband\, sine-on-random\, random-on-random – test parameters entry into a shaker\n\n\n\nMIL-STD-810H Method 514 Vibration Test Profiles\n\n\n\nRTCA-DO-160G Vibration Test Profiles.\n\n\n\nMechanical Shock Test Profiles\, shock test parameters and shaker test demonstrations\n\n\n\nNAVMAT Test profile\n\n\n\n\nHighlights of the Training\n\n\n\n\nTraining Type: International / Face-to-Face\n\n\n\nLocation: Istanbul Technical University. Maritime Faculty. ITU Marine Equipment Test Center (METC). Test Laboratory. Tuzla\, Istanbul.\n\n\n\nLed by a live\, US-based instructor (Dr Ismail Cicek)\n\n\n\nA usual 2.5 days of training schedule is as follows:\n\n\n\nDay 1: 09:00 – 12:30 | 12:30 – 16:30\n\n\n\nDay 2: 09:00 – 12:30 | 12:30 – 16:30\n\n\n\nDay 3: 09:00 – 12:30\n\n\n\nTime zone: Central European Summer Time (CEST+1)\, (UTC+3)\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes presentations\, test demonstrations\, knowledge check quizzes\, and a competition-type fun way of learning.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nAbout the Instructors\n\n\n\nThe primary instructor of the training is Dr Ismail Cicek. He completed his PhD in Mechanical Engineering at Texas Tech University in 1999. His Ph.D was on the Random Vibration. He investigated a passive vibration test absorber theoretically and experimentally. He gained engineering and leadership experience by working for 15 years. He led the development of various platform engineering systems\, including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft. An Avionics Chief Engineer (EE)and a Certified Verification Engineer (FAA/EASA) also assist with the training. Our experienced test personnel also become available for demonstrations and discussions. A Certified Verification Engineer (CVE) in FAA/EASA with over 20 years of experience. He has worked as the chief engineer of avionics systems in product development. He is also experienced in product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nDr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed the Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Click here to read more about Dr Cicek’s professional studies. Connect with Dr Ismail Cicek on the LinkedIn page. \n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\n\nMore Information\n\n\n\nClick this link to read details about the Applied Vibration Testing training\, including contents\, sessions\, and about the instructors.)
URL:https://www.globaldynamicsystems.com/event/applied-vibration-testing-hands-on-training-itu-metc-face-to-face-in-laboratory-training/
LOCATION:ITU METC\, Tuzla\, Istanbul\, Postane Mah. Sahilyolu Cad.\, Tuzla\, 94340
CATEGORIES:Systems Engineering Training Courses,Systems Engineering Training Courses (Open),Vibration Testing
ATTACH;FMTTYPE=image/jpeg:https://www.globaldynamicsystems.com/wp-content/uploads/2024/12/Applied-Vibration-Testing-810H-DO160-Hands-on-Face-to-Face.jpg
ORGANIZER;CN="GDS Training Institute (EU)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250505T083000
DTEND;TZID=UTC:20250509T163000
DTSTAMP:20260404T093531
CREATED:20250312T133744Z
LAST-MODIFIED:20250312T142557Z
UID:5984-1746433800-1746808200@www.globaldynamicsystems.com
SUMMARY:Systems Engineering and Configurations Management [Online]
DESCRIPTION:Platform Management Certification Training – Week 1: Systems Engineering and Configurations Management [Online]\n\n\n\n\n\n\n\n\n\nSchedule: Central European Time (CET\, UTC+1) \n\n\n\nSystems Engineering and Configuration Management training sessions of the Platform Certification Training conducted by Quality Vertex Integrated Systems Engineering (QVISE)\, Global Dynamic Systems\, Inc.\, and GDS Engineering R&D through international collaboration. Register for all training courses or those you would like to attend. All course instructors are global experts\, led by Dr Ismail Cicek. \n\n\n\n\n5 days of certification training in Systems Engineering and  Configurations Management. ONLINE TRAINING with Time Schedule: Central European Time (CET\, UTC+1) \n\n\n\n\nTraining CourseDurationScheduleSystems Engineering2.5 daysDay 1: 8:30 – 12:00 | 13:00 – 16:30Day 2: 8:30 – 12:00 | 13:00 – 16:30Day 3:  8:30 – 12:00Configurations Management2.5 daysDay 1: 13:00 – 16:30Day 2: 8:30 – 12:00 | 13:00 – 16:30Day 3: 8:30 – 12:00 | 13:00 – 16:30\n\n\n\n\n\n\n\n\n\nTraining Method: \n\n\n\n\nCourse Material: English\, including presentations and additional reference material.\n\n\n\nCommunications Language: English\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes and a competition-type\, fun way of learning.\n\n\n\n\nSE Training Course Modules\n\n\n\nModule 1: Introduction To Systems EngineeringModule 2: The System/ Product Life CycleModule 3: Technical ProcessesModule 4: Technical Management ProcessesModule 5: Technical ReviewsModule 6: Practical Systems Engineering and TailoringRead all the details on the Systems Engineering Training: Link: https://www.globaldynamicsystems.com/ip-ils-reliability-systems-engr/training-configuration-management/ \n\n\n\nCM Training Course Modules\n\n\n\nModule 1: CM FoundationModule 2: CM IdentificationModule 3: Configuration Change-ManagementModule 4: CM ImplementationRead the details on the Configurations Management Training using the following Link: https://www.globaldynamicsystems.com/ip-ils-reliability-systems-engr/training-configuration-management/ \n\n\n\n\n\nThe registration cost for one training session (2.5 days) is 1450 USD. Early bird registrations (earlier than one month before the training) will receive a 10% discount. \n\n\n\nWhy Should You Choose “Us\,” QVISE & GDS\, for your Training?\n\n\n\n\nWe offer comprehensive Systems Engineering training to equip professionals with the skills and knowledge necessary to excel in complex project development and management.\n\n\n\nOur expert instructors combine in-depth industry experience with academic rigor to deliver engaging and practical training programs.\n\n\n\nYou can benefit from our hands-on approach\, real-world case studies\, and tailored curriculum to meet your needs.\n\n\n\nBy choosing our training\, you gain the competitive edge to optimize system design and processes\, improve project efficiency\, and drive successful outcomes.
URL:https://www.globaldynamicsystems.com/event/platform-management-certification-training-week-1-systems-engineering-and-configurations-management-online/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:Reliability Engineering,Systems Engineering Training Courses,Systems Engineering V&V Training Courses (Open)
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250430T080000
DTEND;TZID=UTC:20250502T120000
DTSTAMP:20260404T093531
CREATED:20221229T110343Z
LAST-MODIFIED:20250314T123752Z
UID:4268-1746000000-1746187200@www.globaldynamicsystems.com
SUMMARY:MIL-STD-461G EMI/EMC Online Training [EU EST Timezone]
DESCRIPTION:MIL-STD-461G Training on the EMI/EMC Testing of Military Equipment [Online/Live]\, with focus on: \n\n\n\nMIL-STD-461G\, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.\n\n\n\nIncluding the overview of the relevant EMI/EMC test standards: MIL-STD-464\, MIL-STD-704\, MIL-STD-1275\, and RTCA-DO-160G Power Input.  \n\n\n\nTraining Type: International / OnlineSatus: OPENDate: 30 April – 2 May\, 2025 | Timezone: EST (European Standart Time) UTC+1.Time: Day1/2: 08:30 – 16:30\, Day 3: 08:00 – 12:00. \n\n\n\nClick here to read all details about MIL-STD-461G training with detailed contents) \n\n\n\n\nTraining Type: International / Online\n\n\n\nSatus: Seats are avaiable. Early bird (1-month in advance) registrations will receive 10% discount.\n\n\n\nOnline training via ZOOM.\n\n\n\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\n\n\n\nA usual 2.5 days of training schedule is as follows:\n\nDay 1: 08:00 – 11:30 | 13:00 – 16:30\n\n\n\nDay 2: 08:00 – 11:30 | 13:00 – 16:30\n\n\n\nDay 3: 08:00 – 11:30\n\n\n\nTime zone: EST (European Standart Time). UTC+1\n\n\n\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English | Comm. Language: English\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nAttendees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\nTraining Contents\n\n\n\n2.5 days of training covers the following topics: \n\n\n\n\nEMI/EMC Training\, Opening Session\n\nGeneral understanding of EMI and EMC.\n\n\n\nIntroductory Design Considerations: Grounding\, Bonding\, and Shielding.\n\n\n\n\n\nMIL-STD-461G Standard General OverviewIntroduction & History\n\nMIL-STD-461: General overview\, definitions\, nomenclature\, purposes\, language\, and scope\n\n\n\nMIL-STD-461 Contents Overview\n\n\n\nGeneral and detailed requirements\n\n\n\nSelection of test methods and procedures based on the platform and equipment type\n\n\n\n\n\nMIL-STD-461G – CE Tests (Part I)\n\nConducted Emissions Test Methods CE101\, CE102\, CE106\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL-STD-461-G – CE Tests (Part II)\n\nConducted Emissions Test Methods CE101\, CE102\, CE106\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL STD 461G – CS Tests (Part I)\n\nConducted Susceptibility Test Methods CS101\, CS103\, CS104\, CS105\, CS109\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL STD 461G – CS Tests (Part II)\n\nConducted Susceptibility Test Methods CS114\, CS115\, CS116\, CS 117\, CS 118\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nProduct Development and Certification ProcessUS DOD Systems Engineering V&V Processes\, R&D Project vs. End Product\n\nCertification Process (MIL-STD-461\, MIL-STD-464\, MIL-HDBK 516\, US DOD )\n\n\n\nUSAF and US Army EMI/EMC Test and Certification Process\n\n\n\nFAA/EASA Part 21 ve Certification Process\n\n\n\n\n\nDocumentation\, Test Plans\, and Test Reports\n\nTest Plan Examples\n\n\n\nTest Results and Risk Assessment\n\n\n\nTest Reports\n\n\n\nUS DOD Data Items (DI) Forms and Data Item Descriptions (DID)\, governmental and non-governmental documentation\n\n\n\n\n\nMIL-STD-464 Standard\n\nMIL-STD-461 vs MIL-STD-464\n\n\n\nEMI/EMC Platform Level Requirements Review\n\n\n\nMIL-STD-464 Guides: Requirements Rationale and Lessons Learnt Items\n\n\n\n\n\nMIL-STD-461G RS Tests\n\nRadiated Susceptibility Test Methods RS101\, RS103\, RS105\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nMIL-STD-461G RE Tests\n\nRadiated Emissions Test Methods  RE101\, RE102\, RE103\n\n\n\nExample Test Results and Report Reviews\n\n\n\nQ&As\n\n\n\n\n\nEMI/EMC & Equipment Design\n\nEMI/EMC and Equipment Design\n\n\n\nEMI/EMC Analysis Software Programs and Application Examples\n\n\n\nEMI/EMC Analysis Test Programs\n\n\n\n\n\nAdditional Tests (RTCA-DO-160)\n\nPower Input\, RTCA-DO-160G Section 16\n\n\n\nMagnetic Effect\, RTCA-DO-160G Section 15\n\n\n\nLightning Direct Effects\, RTCA-DO-160G Section 23\n\n\n\n\n\nOther Relevant Test Standards\, Brief SummaryMIL-STD-464D Electromgnetic Environmental Effects\, Requirements for SystemsMIL-STD-704F Aircraft Electric Power Characteristics\n\nMIL-STD-1275E Interface Standard\, Characteristics of 28 Volt DC Input Power to Utilization Equipment in Military Vehicles\n\n\n\nMIL-STD-1399 Interface Standard\, Section 300\, Part 1 Low Voltage Electric Power\, Alternating Current\n\n\n\nMIL-STD-1399 Interface Standard\, Section 300\, Part 2 Medium Voltage Electric Power\, Alternating Current\n\n\n\n\n\n\nAll MIL-STD-461G test sections are discussed and explained in detail\, includingThe Purpose of the TestTest Configurations and General RequirementsTest Requirements and Procedures \n\n\n\n\nEMI Test Chamber\n\n\n\nTest Setup: Test Setup (Tabletop) / Test Setup (Free Standing)\n\n\n\nMeasurement Tolerances\n\n\n\nInterpretation of the Test Results and Example Test Report Reviews\n\n\n\nIssues that might be observed with recommendations (based on design experience).\n\n\n\n\nInstructors\n\n\n\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\nMore Information\n\n\nPlease enable JavaScript in your browser to complete this form.Name *FirstLastEmail *		\n			insterested in: the\n			\n		\n		Type in the information for the training you are insterested in: *Please provide us your training interest with enough information\, for example\, the training name and date of the training.\n\nFor Individual Training\, type in the training name and date of the training you would like to participate.\n\nFor group training requests and quotes\, please type\n– your interested training name\,\n– approximate number of  attendees\n– training type (online or face-to-face)\n\nPlease provide enough information for other training requests.\n \nThank you.Submit
URL:https://www.globaldynamicsystems.com/event/mil-std-461g-training-on-emi-emc-testing-of-military-equipment-online-live-international-english/
LOCATION:Online Training via ZOOM
CATEGORIES:MIL-STD-461G EMI/EMC Training,Systems Engineering Training Courses,Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/Online-Training-on-MIL-STD-461G-Live-Design-Items-Included.png
ORGANIZER;CN="GDS Training Institute (US)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250409T083000
DTEND;TZID=UTC:20250411T123000
DTSTAMP:20260404T093531
CREATED:20241203T145106Z
LAST-MODIFIED:20250115T130851Z
UID:5194-1744187400-1744374600@www.globaldynamicsystems.com
SUMMARY:Reliability Enginering  | Online/Live [250402G]
DESCRIPTION:Time Schedule: Central European Time (CET\, UTC+1)Day 1 and 2: 08:30 – 11:30   |   12:30 – 16:30  Day 3: 08:30 – 12:00 \n\n\n\n\n\nReliability engineering is a sub-discipline of systems engineering that emphasizes the ability of equipment to function without failure. Reliability is the probability that a product\, system\, or service will perform its intended function adequately for a specified period OR operate in a defined environment without failure. Reliability is closely related to availability\, which is typically described as the ability of a component or system to function at a specified moment or interval of time. \n\n\n\n\n\n\n\n\n\n\n\nTraining Plan\n\n\n\n\nTraining Type: International / Online\n\n\n\nSatus: Seats are avaiable.\n\n\n\nOnline training using ZOOM.\n\n\n\nTwo instructors lead the training from QVISE and GDS.\n\n\n\n2.5 days of training schedule is as follows:\n\nDay 1: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 2: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 3: 08:30 – 12:00\n\n\n\nTime zone: Central European Time (CET) (UTC+1)\n\n\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English\, including presentations and additional reference material.\n\n\n\nCommunications Language: English\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning.\n\n\n\n\nOur Reliability\, Integrated Product Support (IPS)\, IPS/ILS/Reliability) courses are certified courses are certification training courses conducted by Quality Vertex Integrated Systems Engineering (QVISE)\, Global Dynamic Systems\, Inc.\, and GDS Engineering R&D\, Inc. international collaboration. You can register for two weeks for all modules OR register only for the module(s) you have an interest. All course instructors are international experts\, led by Dr Ismail Cicek. \n\n\n\nHighlights of the Training\n\n\n\n\nThe Reliability Engineering Courses are focused to provide individuals with a complete run-down of all the basics of a Reliability Program\, with a solid foundation.\n\n\n\nThe program is structured into eight (8) distinct modules designed to be thorough yet concise.\n\n\n\nOur curriculum is carefully designed to align with military standards and best practices\, ensuring that participants gain a deep understanding of Reliability Engineering principles\, processes\, and implementation techniques.\n\n\n\nUpon successful completion of the program\, learners will demonstrate a basic level expertise of Reliability Engineering concepts & strategies.\n\n\n\nKeywords of this training: Reliability | Reliability Modeling & Prediction | Availability | CBM | LORA | FMECA | FRACAS | Root-Cause | Event Tree Analysis | Block Diagrams | Relability Growth | ESS | LCCA | Reliability Qualification | Reliability Governence | Parts Management | Obselesence Management | Military Standards | Safety & Risk Assessment\n\n\n\n\nLive Demosntrations with FALCON Software\n\n\n\nWhy You should choose “QVISE-GDS” for your ILS Training?\n\n\n\n\nBy choosing this QVISE-GDS Collaborative Training\, you gain the tools and expertise to optimize product reliability\, reduce failures\, and improve overall product life cycle performance.\n\n\n\nWe offer exceptional Reliability Engineering training to empower professionals to enhance product performance and durability.\n\n\n\nOur expert instructors combine industry knowledge with practical experience to deliver comprehensive and engaging training programs.\n\n\n\nYou benefit from our hands-on approach\, real-world case studies\, and tailored curriculum to meet your specific reliability objectives.\n\n\n\n\nReliability Engineering Course Modules\n\n\n\nModule 1: Introduction to ILS/ IPS\, Reliability & Supportability EngineeringModule 2: Reliability Governance & Contractual ManagementModule 3: Reliability Program Reviews & Failure Review Board (FRB)Module 4: Reliability Modeling & AllocationModule 5: Reliability PredictionModule 6: Failure Modes\, Effects & Criticality Analysis (FMECA) and Failure Reporting Analysis & Corrective Action System (FRACAS)Module 7: Reliability Growth (RGT) & Environmental Stress Screening (ESS)Module 8: Reliability Qualification & Production Reliability Acceptance Testing (RQT & PRAT) \n\n\n\nMore information: Click to read all details about this training. \n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com
URL:https://www.globaldynamicsystems.com/event/reliability-enginering/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:Reliability Engineering,Systems Engineering Training Courses,Systems Engineering Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2024/12/image-3.png
ORGANIZER;CN="GDS Training Institute (EU)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250314T083000
DTEND;TZID=UTC:20250316T163000
DTSTAMP:20260404T093531
CREATED:20250110T130012Z
LAST-MODIFIED:20250310T163822Z
UID:5694-1741941000-1742142600@www.globaldynamicsystems.com
SUMMARY:Electronically Controlled Main Engines: Training with ERS and MPC | Online/Live
DESCRIPTION:This training is for operational understanding and hands on applications for the Electronically Controlled Engines used as a main propulsion ship engine. It is an Online Training for the operation and management of ME type engine control systems with the use of a Multi Purpose Controller (MPC) and an Engine Room Simulator with ME type engine. \n\n\n\nWho Should Attend this Training? \n\n\n\nMarine Engineers working onboard ships of shore technical personnel as follows: \n\n\n\n\nEngineering officers working onboard ships: Chief Engineer\, 2nd Engineer and watchkeeping offices\n\n\n\nElectrotechnical/Electric Officers\n\n\n\nShore-personnel: Personnel working on the technical management side of the ship operating companies. Technical managers\, inspectors\, and superintendents.\n\n\n\n\n3 days of hands-on ONLINE training using Ship Engine Room Simulator (SERS™) and a Multi-Purpose Controller (MPC)\n\n\n\n\nDay 1: Basic Operations with Engine Room Simulator (w/ME engine)\n\n\n\nDay 2: Advanced Operations with Engine Room Simulator (w/ME engine)\n\n\n\nDay 3: Electronically Controlled Engine – Operations and Maintenance\n\n\n\n\nFigure 1. Multi-Purpose Controller (MPC) used in the training.\n\n\n\nElectronically controlled marine diesel engines were designed especially in the 2000s in order to meet the requirements of MARPOL Annex VI to reduce ship-borne air pollution and ensure energy efficiency. With the development of the working conditions of traditional marine diesel engines\, the training of responsible shift engineers has become an important need. \n\n\n\n\n\n\n\nMinimization of human error and minimization of risks will be through familiarity with the failure scenarios to be experienced. In this sense\, SERS™ engine room simulator training will be an important opportunity to prevent accidents resulting in material and life losses for ship personnel and companies with various scenarios such as possible malfunctions\, routine operations and emergency scenarios. \n\n\n\nFigure 2. Ship Engine Room Simulator used in the Electronically Controlled Engine training. A view from Istanbul Technical University Simulator Center – An ongoing ERS training.\n\n\n\nWith the training designed as Basic Level (2 days) and Advanced Level (1 day)\, it is aimed to provide important information on topics such as the operation of electronically controlled marine diesel engines\, possible malfunctions\, and performance analysis. GDS Engineering R&D Team of Marine Engineering Training Experts has provided a solution to this training need\, which is increasing day by day in global maritime trade\, and aimed to increase the training efficiency by strengthening this solution with simulator and MPC applications. \n\n\n\nElectronically controlled marine diesel engines is designed to reduce ship-borne air pollution and provide energy efficiency\, especially in the 2000s to meet MARPOL Annex VI requirements. The training of responsible  duty engineers has become an important need with the development of working conditions of commercial marine diesel engines\, \n\n\n\nMinimizing human error and minimizing risks will be achieved through familiarity with possible failure scenarios. In this sense\, SERSTM engine room simulator training provides familiarity with endless scenarios and possible failures. In this way\, it will be an important opportunity to prevent accidents that result in material and life losses for seafarers and companies due to failures. SERS™ provides full software functions for ME Controlled Engines that are currently in use onboard cargo ships. These tools are PMI\, MOP A and MOP B panels\, and additional engine performance diagram tools for monitoring and plotting the engine variables versus time or versus each other (X-Y graphs). The toold provide a mean of comparing the simulated variables against the actual ones recorded during actual tests\, i.e. in factory or seakeeping tests. \n\n\n\nThe training\, designed as basic level (2 days) and advanced level (1 day)\, aims to provide important information on electronically controlled marine diesel engines. GDS R&D Engineering aims to provide a solution for an important need in global maritime trade. \n\n\n\nTraining Program\n\n\n\nDay 1\n\n\n\n\nIntroduction: Development of Diesel Engines\,  Electronically Controlled Machinary and Engines\, Differences between Electronically Controlled and Classical Diesel Engines\n\n\n\nElectronically Controlled Diesel Engine Structure and Components\n\n\n\nHydraulic Elements\n\n\n\nHydraulically Controlled Units and Panels\n\n\n\nFuel system structure and elements\n\n\n\nCylinder Lubrication System and Elements\n\n\n\nExhaust Valve System and Elements\n\n\n\nTacho Sistem\n\n\n\nEngine Control Systems\n\n\n\nTroubleshooting methods\n\n\n\nThe most common malfunctions\n\n\n\nService Notes/ Bulletins/ Circular reviews\n\n\n\n\nDay 2\n\n\n\n\nMulti Purpose Controller\n\n\n\nMulti Purpose Controller Problems\n\n\n\nPerformance Diagrams and Evaluations\n\n\n\nSimulator Application Sessions – Hands on Training using the Ship Engine Room Simulator (SERS™)\n\n\n\n\nDay 3\n\n\n\n\nAdvanced electronic elements and automatic control principles\n\n\n\nAdvanced mechatronics and automation principles\n\n\n\nMulti Purpose Controller and a detailed discussion session\n\n\n\nFIVA  Valve\, Tacho\, MCU systems – advanced level troubleshooting\n\n\n\nCoCOS-EDS\, PMI\n\n\n\nPerofrmance calculations and evaluation with engine performance curves\n\n\n\nSimulator Application Sessions – Hands on Training using the Ship Engine Room Simulator (SERS™)\n\n\n\n\nTraining Method: \n\n\n\nFace to face / Online \n\n\n\nTraining Material: \n\n\n\nGDS SERSTM Engine Room Simulator / Multi Purpose Controller (MPC) application. \n\n\n\nTraining Cost: \n\n\n\nPlease get in touch with us for your training requests. The training is provided to indivuals and to organizations with groups. \n\n\n\nInstructors:Two instructors provide the training. \n\n\n\nThis training will be provided by two instructors. One instructor has both academic and Chief Engineering experience with ME engines. The second instructor is a marine engineer with both sea experience and sngine room simulator instructor experience. \n\n\n\nEnrollment Form\n\n\n\nEnroll and reserve your seat today! Advance registrations of 1 month or earlier from the training date will receive a 10% discount! \n\n\nPlease enable JavaScript in your browser to complete this form.Name *FirstLast		\n			training Type for\n			\n		\n		Email *Type in the information for the training you are insterested in: *Please provide us your training interest with enough information\, for example\, the training name and date of the training.\n\nFor Individual Training\, type in the training name and date of the training you would like to participate.\n\nFor group training requests and quotes\, please type\n– your interested training name\,\n– approximate number of  attendees\n– training type (online or face-to-face)\n\nPlease provide enough information for other training requests.\n \nThank you.Submit
URL:https://www.globaldynamicsystems.com/event/erstraining-electronicallycontrolledengines-march2025/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
ATTACH;FMTTYPE=image/jpeg:https://www.globaldynamicsystems.com/wp-content/uploads/2025/01/Multi-Purpose-Controller-MPC-used-in-GDS-ME-Controlled-Engine-Training-with-the-ERS-Use-SERS™.jpg
ORGANIZER;CN="GDS Training Institute (US)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250305T083000
DTEND;TZID=America/New_York:20250307T163000
DTSTAMP:20260404T093531
CREATED:20241206T113923Z
LAST-MODIFIED:20250112T070716Z
UID:5343-1741163400-1741365000@www.globaldynamicsystems.com
SUMMARY:RTCA-DO-160G: Training on Environmental and EMI/EMC Testing of Airborne Equipment (FAA/EASA Test Requirements) | [Online/Live] [US Timezone CDT\, UTC-5] [250301U]
DESCRIPTION:2.5 Days\, Hands-on\, “Online” or “Onsite” Training Class. Led by live\, two instructors. \n\n\n\n\n\n\n\nTime Schedule: US Central Daytime (CDT\, UTC-5) \n\n\n\nInternational Training with a focus on the test standard document“RTCA-DO-160G Environmental Conditionsand Test Procedures for Airborne Equipment© 2010\, RTCA\, Inc.” \n\n\n\nThis training is an important step fortesting and certifying your products in accordance with the FAA/EASA test requirements. \n\n\n\n\nGDS Engineering R&D\, Inc. is an official member of the RTCA Organization. \n\n\n\n\nRTCA-DO-160G Online Training\, FAA/EASA Equipment Test Requirements. This training is an important step for testing and certifying your products in accordance with the FAA/EASA test requirements. \n\n\n\nOur Instructors share their experience and knowledge gained by working long years in the field with designing products and performing tests in accordance with such as RTCA-DO-160\, MIL-STD-810\, and MIL-STD-461. The slides are supported by many graphics and test videos for the efficiency and clarity of the information and each session is planned in accordance with the sections in RTCA-DO-160G. \n\n\n\nTraining Plan\n\n\n\n\nTraining Type: International / Online\n\n\n\nSatus: Seats are avaiable.\n\n\n\nOnline training using ZOOM.\n\n\n\nLed by a live\, US-based instructor (Dr Ismail Cicek)\n\n\n\n2.5 days of training schedule is as follows:\n\nDay 1: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 2: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 3: 08:30 – 12:00\n\n\n\nTime zone: Central European Time (CET) (UTC+1)\n\n\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English (US)\, including presentations and additional reference material.\n\n\n\nCommunications Language: English (US)\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning\n\n\n\n\nSummary Information\n\n\n\n\nA good understanding of product testing in view of RTCA-DO-160G\n\n\n\nOverview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document and relations with RTCA-DO-160 testing\n\n\n\nPart 21 and FAA/EASA Regulations\n\n\n\nTest Requirement Reference\n\n\n\nTest Category Selections\n\n\n\nTest Procedures\, Scheduling\, Test Implementation and Review of Test Reports\n\n\n\nTest Sections (Environmental & EMI/EMC): All test sections are covered with detail discussions except several tests\, such as Fungus Tesing and Waterproofness are discussed in summary with important aspects.\n\n\n\nDiscussions include design issues\, test failures\, and recommendations\n\n\n\nA session with Risk Management Method includes how to resolve a test result that may not be a failure\, i.e. anomalies.\, with a process that we recommend.\n\n\n\nImportance of establishing Integrated Product Team (IPT) or with another name “Test Review Team” for reviewing test plans and results and identifying the next step when issues are encountered.\n\n\n\nDesign Recommendations are emphasized in each test section.\n\n\n\nAdditional or alternative (standards and tests) are recommended for certain cases.\n\n\n\n\nAbout the Instructors\n\n\n\nThe main instructor of the training is Dr Ismail Cicek. He gained engineering and leadership experience by working for 15 years. He led the development of various platform engineering systems\, including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft. An Avionics Chief Engineer (EE)and a Certified Verification Engineer (FAA/EASA) also assist with the training. Our experienced test personnel also become available for demonstrations and discussions. A Certified Verification Engineer (CVE) in FAA/EASA with 18 years of experience. He has worked as the chief engineer of avionics systems in product development. He is also experienced in product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nDr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Click here to read more about Dr Cicek’s professional studies. Connect with Dr Ismail Cicek on the Linkedin page. \n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\n\nMore Information and Contents of the Training\n\n\n\nClick here to read the details about this training.
URL:https://www.globaldynamicsystems.com/event/rtca-do-160g-training-on-environmental-and-emi-emc-testing-of-airborne-equipment-faa-easa-test-requirements-online-live-us-timezone-cdt-utc-5-250301u/
LOCATION:GDS
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2022/02/GDS-RTCA-DO-160G-Training-Program-Banner-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20250210T083000
DTEND;TZID=Europe/Paris:20250214T163000
DTSTAMP:20260404T093531
CREATED:20241204T123851Z
LAST-MODIFIED:20250112T075642Z
UID:5282-1739176200-1739550600@www.globaldynamicsystems.com
SUMMARY:Platform Management Certification Training\, Week 2: IPS\, ILS\, and Reliability Engineering [Online/Live] [Global\, EU CET Timezone] [250202G]
DESCRIPTION:ONLINE TRAINING with Time Schedule: Central European Time (CET\, UTC+1) \n\n\n\nThe second week of Certification Training Focused on  Integrated Product Support (IPS)\,Integrated Logistics Support (ILS)\,Test and Evaluation (Systems Engineering)\,Reliability Engineering (RE)\, andEnvironmental Stress Screening (ESS). \n\n\n\n\n\n\n\nIntegrated Product Support (IPS)\, Integrated Logistics Support (ILS)\, Systems\, Engineering\, and Reliability Engineering courses are certification training courses conducted by Quality Vertex Integrated Systems Engineering (QVISE)\, Global Dynamic Systems\, Inc.\, and GDS Engineering R&D\, Inc. through international collaboration. You can register for two weeks for all modules OR register only for the module(s) you have an interest in. All course instructors are international experts\, led by Dr Ismail Cicek. \n\n\n\nTraining Plan\n\n\n\nWeek 1 Training Modules (3-7 Feb. 2025)DurationSystems Engineering2.5 daysRequirements Development and Management Engineering 0.5 dayConfigurations Management 1.5 dayRisk Management0.5 day\n\n\n\nWeek 2 Training Modules (10-14 Feb. 2025)DurationIntegrated Product Support (IPS) & Integrated Logistics Support (ILS)2.5 daysTest and Evaluation (T&E\, Systems Engineering)0.5 dayReliability Engineering (RE)1.5 dayEnvironmental Stress Screening (ESS\, Environmental Tests for Manufacturing) 0.5 day\n\n\n\n\nTraining Type: International / Online\n\n\n\nStatus: Seats are available.\n\n\n\nOnline training using ZOOM.\n\n\n\nDaily Schedule\n\n08:30 – 11:30 | 12:30 – 16:30\n\n\n\nTime zone: Central European Time (CET) (UTC+1)\n\n\n\n\n\nTwo instructors from QVISE and GDS lead this training.\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English\, including presentations and additional reference material.\n\n\n\nCommunications Language: English\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning.\n\n\n\n\nSystems Engineering (SE) Training Course Modules\n\n\n\nModule 1: Introduction To Systems EngineeringModule 2: The System/ Product Life CycleModule 3: Technical ProcessesModule 4: Technical Management ProcessesModule 5: Technical ReviewsModule 6: Practical Systems Engineering and TailoringRead all the details on the Systems Engineering Training: \n\n\n\n\nhttps://www.globaldynamicsystems.com/ip-ils-reliability-systems-engr/systems-engineering-product-lifecycle-management-plcm/\n\n\n\n\nRequirements Engineering and Management (REQM) Training Course Module\n\n\n\n\nDevelop Requirements List using the the Operational Concepts and Use Cases\n\nDeveloping System Overview with Synopsis\, Context\, Entities\, and Goals\n\n\n\nContext Diagrams and System Boundary with Physical Interfaces\n\n\n\nEnvironmental\, Controlled and Monitored Variables\n\n\n\nEnvironmental Assumptions and Constraints\n\n\n\nDeveloping Operational Concepts. Use Cases and Exceptional Situations with Alternate Ways\n\n\n\n\n\nFunctional Architecture\n\n\n\nBehaviour and Performance Requirements\n\n\n\nSoftware Requirements\n\n\n\nRequirements Quality and Rationale\n\n\n\nRequirements Allocation\n\n\n\nMonitoring Requirements\n\n\n\nManaging Requirements with Tools and Software\n\n\n\n\nRead the details on the Requirements Engineering and Management Module: https://www.globaldynamicsystems.com/systems-engineering-training-courses/rem-training/ \n\n\n\n\nRequirements Engineering Management Training (FAA/EASA/DOD/NASA)\n\n\n\n\nConfigurations Management (CM) Training Course Modules\n\n\n\nModule 1: CM FoundationModule 2: CM IdentificationModule 3: Configuration Change-ManagementModule 4: CM ImplementationRead the details on the Configurations Management Training using the following link: https://www.globaldynamicsystems.com/ip-ils-reliability-systems-engr/training-configuration-management/ \n\n\n\n\nhttps://www.globaldynamicsystems.com/ip-ils-reliability-systems-engr/training-configuration-management/\n\n\n\n\nIntegrated Product Support (IPS) and Integrated Logistics Support (ILS) Training Modules\n\n\n\n\nModule 1: Introduction to ILS / IPS\, Reliability and Supportability Engineering\n\n\n\nModule 2: Product Support Analysis (PSA) Insight\n\n\n\nModule 3: Life Cycle Costing (LCC)\, Availability and Maintainability Analysis\n\n\n\nModule 4: Logistics Product Data (LPD)\n\n\n\nModule 5: Synergizing Maintenance Strategies\n\n\n\nModule 6: Level Of Repair Analysis (LORA)\, Producibility and Supportability Assessment\n\n\n\nModule 7: Supply Support\, Provision & Obsolescence Management\n\n\n\nModule 8: Packaging\, Handling\, Storage & Transport (PHS&T)\n\n\n\nModule 9: ILS / IPS Contact Management\n\n\n\n\nRead the details on the IPS/ILS Training using the following link: https://www.globaldynamicsystems.com/ips-ils-training/ \n\n\n\nReliability Engineering (RE) Training Modules\n\n\n\nReliability Engineering Course Modules\n\n\n\nModule 1: Introduction to ILS/ IPS\, Reliability & Supportability EngineeringModule 2: Reliability Governance & Contractual ManagementModule 3: Reliability Program Reviews & Failure Review Board (FRB)Module 4: Reliability Modeling & AllocationModule 5: Reliability PredictionModule 6: Failure Modes\, Effects & Criticality Analysis (FMECA) and Failure Reporting Analysis & Corrective Action System (FRACAS)Module 7: Reliability Growth (RGT) & Environmental Stress Screening (ESS)Module 8: Reliability Qualification & Production Reliability Acceptance Testing (RQT & PRAT) \n\n\n\nRead the details on the Reliability Engineering Training using the following link: https://www.globaldynamicsystems.com/training-on-reliability-engineering/ \n\n\n\nWhy Should You Choose “Us\,” QVISE & GDS\, for your Training?
URL:https://www.globaldynamicsystems.com/event/platform-management-certification-training-week-2-ips-ils-and-reliability-engineering-250202g/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2024/12/image-3.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250203T080000
DTEND;TZID=UTC:20250207T170000
DTSTAMP:20260404T093531
CREATED:20241204T114640Z
LAST-MODIFIED:20250125T102227Z
UID:5263-1738569600-1738947600@www.globaldynamicsystems.com
SUMMARY:Platform Management  Certification Training\, Week 1: Systems Engineering\, Configurations Management\, Requirements Engineering and Risk Management [Online/Live] [Global\, EU CET Timezone] [250201G]
DESCRIPTION:Schedule: Central European Time (CET\, UTC+1) \n\n\n\n\n\n\n\nIntegrated Product Support (IPS)\, Integrated Logistics Support (ILS)\, Systems\, Engineering\, and Reliability Engineering courses are certification training courses conducted by Quality Vertex Integrated Systems Engineering (QVISE)\, Global Dynamic Systems\, Inc.\, and GDS Engineering R&D\, Inc. through international collaboration. You can register for two weeks for all modules OR register only for the module(s) you have an interest in. All course instructors are international experts\, led by Dr Ismail Cicek. \n\n\n\n\n\n\n\n\n\n\n\n5 days of certification training in Systems Engineeringfocused on Systems Engineering\, Configurations Management\, Requirements Development and Management\, and Risk ManagementONLINE TRAINING with Time Schedule: Central European Time (CET\, UTC+1) \n\n\n\n\n\nTraining Plan\n\n\n\nWeek 1: Systems Engineering (3-7 Feb. 2025)DurationSystems Engineering2.5 daysRequirements Development and Management Engineering 0.5 dayConfigurations Management 1.5 dayRisk Management0.5 day\n\n\n\nWeek 2: IPS/ILS/RE (10-14 Feb. 2025)DurationIntegrated Product Support (IPS) & Integrated Logistics Support (ILS)2.5 daysTest and Evaluation0.5 dayReliability Engineering (RE)1.5 dayEnvironmental Stress Screening (ESS\, Environmental Tests for Manufacturing) 0.5 day\n\n\n\n\nTraining Type: International / Online\n\n\n\nStatus: Seats are available.\n\n\n\nOnline training using ZOOM.\n\n\n\nDaily Schedule\n\n08:30 – 11:30 | 12:30 – 16:30\n\n\n\nTime zone: Central European Time (CET) (UTC+1)\n\n\n\n\n\nTwo instructors from QVISE and GDS lead this training.\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English\, including presentations and additional reference material.\n\n\n\nCommunications Language: English\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning.\n\n\n\n\nSE Training Course Modules\n\n\n\nModule 1: Introduction To Systems EngineeringModule 2: The System/ Product Life CycleModule 3: Technical ProcessesModule 4: Technical Management ProcessesModule 5: Technical ReviewsModule 6: Practical Systems Engineering and TailoringRead all the details on the Systems Engineering Training: \n\n\n\nRequirements Engineering and Management Training Course Module\n\n\n\n\nDevelop Requirements List using the the Operational Concepts and Use Cases\n\nDeveloping System Overview with Synopsis\, Context\, Entities\, and Goals\n\n\n\nContext Diagrams and System Boundary with Physical Interfaces\n\n\n\nEnvironmental\, Controlled and Monitored Variables\n\n\n\nEnvironmental Assumptions and Constraints\n\n\n\nDeveloping Operational Concepts. Use Cases and Exceptional Situations with Alternate Ways\n\n\n\n\n\nFunctional Architecture\n\n\n\nBehaviour and Performance Requirements\n\n\n\nSoftware Requirements\n\n\n\nRequirements Quality and Rationale\n\n\n\nRequirements Allocation\n\n\n\nMonitoring Requirements\n\n\n\nManaging Requirements with Tools and Software\n\n\n\n\nRead the details on the Requirements Engineering and Management Module: https://www.globaldynamicsystems.com/systems-engineering-training-courses/rem-training/ \n\n\n\nCM Training Course Modules\n\n\n\nModule 1: CM FoundationModule 2: CM IdentificationModule 3: Configuration Change-ManagementModule 4: CM ImplementationRead the details on the Configurations Management Training using the following link: https://www.globaldynamicsystems.com/ip-ils-reliability-systems-engr/training-configuration-management/ \n\n\n\nIPS/ILS Training Modules\n\n\n\n\nModule 1: Introduction to ILS / IPS\, Reliability and Supportability Engineering\n\n\n\nModule 2: Product Support Analysis (PSA) Insight\n\n\n\nModule 3: Life Cycle Costing (LCC)\, Availability and Maintainability Analysis\n\n\n\nModule 4: Logistics Product Data (LPD)\n\n\n\nModule 5: Synergizing Maintenance Strategies\n\n\n\nModule 6: Level Of Repair Analysis (LORA)\, Producibility and Supportability Assessment\n\n\n\nModule 7: Supply Support\, Provision & Obsolescence Management\n\n\n\nModule 8: Packaging\, Handling\, Storage & Transport (PHS&T)\n\n\n\nModule 9: ILS / IPS Contact Management\n\n\n\n\nRead the details on the IPS/ILS Training using the following link: https://www.globaldynamicsystems.com/ips-ils-training/ \n\n\n\nReliability Engineering Training Modules\n\n\n\nReliability Engineering Course Modules\n\n\n\nModule 1: Introduction to ILS/ IPS\, Reliability & Supportability EngineeringModule 2: Reliability Governance & Contractual ManagementModule 3: Reliability Program Reviews & Failure Review Board (FRB)Module 4: Reliability Modeling & AllocationModule 5: Reliability PredictionModule 6: Failure Modes\, Effects & Criticality Analysis (FMECA) and Failure Reporting Analysis & Corrective Action System (FRACAS)Module 7: Reliability Growth (RGT) & Environmental Stress Screening (ESS)Module 8: Reliability Qualification & Production Reliability Acceptance Testing (RQT & PRAT) \n\n\n\nRead the details on the Reliability Engineering Training using the following link: https://www.globaldynamicsystems.com/training-on-reliability-engineering/ \n\n\n\nWhy Should You Choose “Us\,” QVISE & GDS\, for your Training?\n\n\n\n\nWe offer comprehensive Systems Engineering training to equip professionals with the skills and knowledge necessary to excel in complex project development and management.\n\n\n\nOur expert instructors combine in-depth industry experience with academic rigor to deliver engaging and practical training programs.\n\n\n\nYou can benefit from our hands-on approach\, real-world case studies\, and tailored curriculum to meet your needs.\n\n\n\nBy choosing our training\, you gain the competitive edge to optimize system design and processes\, improve project efficiency\, and drive successful outcomes.
URL:https://www.globaldynamicsystems.com/event/platform-management-certification-training-week-1-systems-engineering-configurations-management-requirements-engineering-and-risk-management-250201g/
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2024/12/image-3.png
ORGANIZER;CN="GDS Training Institute (EU)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250129T083000
DTEND;TZID=UTC:20250131T123000
DTSTAMP:20260404T093531
CREATED:20241204T100520Z
LAST-MODIFIED:20250112T063024Z
UID:5234-1738139400-1738326600@www.globaldynamicsystems.com
SUMMARY:MIL-STD-810H: Training on Environmental Testing of Military Equipment | [Online/Live] [Global\, EU CET Timezone] [250204G]
DESCRIPTION:MIL-STD-810H\, US Department Of Defence Test Method Standard Environmental Engineering Considerations and Laboratory Tests\n\n\n\nGDS Engineering R&D\, Inc. provides online international training on MIL-STD-810H Environmental qualification testing of military equipment. Training focuses on the standard with tailoring examples. This training is essential for testing and certifying your military equipment and products following MIL-STD-810H\, platform test requirements\, and other applicable standards and specifications. Tailoring is generally emphasized with examples in the presentation of test methods. Tailoring includes changing the test requirements based on CONOPS\, LCEP\, and Mission Criticality of the Item and using similar operational requirements. \n\n\n\nHighlights of the Training\n\n\n\n\nTraining Type: International / Online\n\n\n\nSatus: Seats are avaiable.\n\n\n\nOnline training using ZOOM.\n\n\n\nLed by a live\, US-based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\n\n\n\nA usual 2.5 days of training schedule is as follows:\n\nDay 1: 08:30 – 11:30 | 12:30 – 16:30 \n\n\n\nDay 2: 08:30 – 11:30 | 12:30 – 16:30\n\n\n\nDay 3: 08:30 – 12:00 \n\n\n\nTime zone: Central European Time (CET) (UTC+1)\n\n\n\n\n\nEnding time may vary +/-30 minutes depending on the length of the discussions.\n\n\n\nCourse Material: English (US)\, including presentations and additional reference material.\n\n\n\nCommunications Language: English (US)\n\n\n\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\n\n\n\nAttandance: The link for online class is distributed to registered trainees upon registration.\n\n\n\nTrainees will receive a Training Certificate.\n\n\n\nTraining includes knowledge check quizzes\, a competition-type fun way of learning.\n\n\n\n\nTraining Scope\n\n\n\n\nA good understanding of product testing in view of MIL-STD-810G/H and other relevant military standards.\n\n\n\nOverview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document.\n\n\n\nEstablishment of Test Requirements and Test Plans.\n\n\n\nTest Procedures\, Scheduling\, Implementation\, and Test Reports.\n\n\n\nPer MIL-STD-810\, tests are covered in detail\, including altitude\, temperature\, humidity\, shock\, vibration\, acceleration\, salt fog\, explosive atmosphere\, and all other test methods.\n\n\n\nTest methods are detailed with purpose\, applications\, limitations\, procedures\, test parameters\, and tailoring examples.\n\n\n\nWe briefly cover some of the MIL-STD-810H test methods; however\, we ensure that all questions are answered for each method.\n\n\n\nCases studies\, sample reports and discussions on issues.\n\n\n\nDesign issues and test failure discussions.\n\n\n\nRisk management for test results and acceptance criteria.\n\n\n\nDesign Recommendations.\n\n\n\n\nPlatform and equipment test examples are provided in each test method presentations and discussions\, including: \n\n\n\n\nMilitary aircraft platforms (fixed and rotary wing)\, ground vehicles\, and navy ships\n\n\n\nAvionics\, electrical and mechanical systems\, and structural project applications\n\n\n\nTest tailoring examples to include the selection of tests\, parameter levels\, and durations\n\nConcepts of Operations (CONOPS) document and test curve establishment.\n\n\n\nTailoring and Life Cycle Environmental Profile (LCEP)\n\n\n\nMission Profile\n\n\n\n\n\nFor tailoring\, read more at https://www.globaldynamicsystems.com/posts/mil-std-810h-training-tailoring-is-essential-explained/\n\n\n\n\nMIL-STD-810H Test Methods \n\n\n\n500.6 Low Pressure (Altitude)501.7 High Temperature502.7 Low Temperature503.7 Temperature Shock504.3 Contamination by Fluids            505.7 Solar Radiation (Sunshine)506.6 Rain (IP for Water)507.6 Humidity508.8 Fungus509.7 Salt Fog510.7 Sand and Dust (IP for Sand/Dust)511.7 Explosive Atmosphere512.6 Immersion (IP for Water)513.8 Acceleration514.8 Vibration515.8 Acoustic Noise516.8 Shock517.3 Pyroshock518.2 Acidic Atmosphere519.8 Gunfire Shock520.5   Combined Environments521.4 Icing/Freezing Rain522.2 Ballistic Shock523.4 Vibro-Acoustic/Temperature524.1 Freeze / Thaw525.2 Time Waveform Replication526.2   Rail Impact527.2   Multi-Exciter528.1   Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally Excited\n\n\n\nAbout the Instructors\n\n\n\nThe main instructor of the training is Dr Ismail Cicek. He gained engineering and leadership experience by working for 15 years. He led the development of various platform engineering systems\, including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft. An Avionics Chief Engineer (EE)and a Certified Verification Engineer (FAA/EASA) also assist with the training. Our experienced test personnel also become available for demonstrations and discussions. A Certified Verification Engineer (CVE) in FAA/EASA with 18 years of experience. He has worked as the chief engineer of avionics systems in product development. He is also experienced in product testing per environmental and EMI/EMC standards and FAA/EASA certification processes. \n\n\n\nRelation with RTCA-DO-160G\n\n\n\n\nTraining will compare MIL-STD-810H tests against the FAA/EASA certification test requirements covered in RTCA-DO-160. This helps a better understanding of the tailoring concepts in MIL-810H.\n\n\n\nFor example\, Fire Flammability will be covered in detail in this training.\n\n\n\nDifferences in some test procedures\, for example\, Altitude\, Temperature\, Water Proofness / Rain / Immersion\, Humidity\, Contamination by Fluids\, Vibrations\, Shock and Crash Accelerations\, Icing Freezing\, and Salt Fog\, will be explained with rationale.\n\n\n\nDemonstrating the differences between DO160 and 810 is a great way of understanding the tailoring process iaw MIL-STD-810H.\n\n\n\n\nDr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Click here to read more about Dr Cicek’s professional studies. Connect with Dr Ismail Cicek on the Linkedin page. \n\n\n\nRelation with Industrial and Other Military Standards\n\n\n\n\nIn some cases\, more than MIL-STD-810H tests may be needed\, especially when additional specific material requirements are concerned.\n\n\n\nTraining covers a test standards session\, during which examples from other military and industrial standards are explained briefly. This session explains the rationale for choosing MIL-STD-810 test methods or other military/industrial standards.\n\n\n\nFor example\, military or DO-60 Salt Fog test versus ASTM corrosion tests are explained with when and why you may need other tests.\n\n\n\nTest plans usually include EMI/EMC test procedures. Training will provide a short session with a general overview of the MIL-STD-461 testing and how to select procedures for your equipment and platform.\n\n\n\n\n\nRegistration\n\n\n\nWe provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization\, please get in touch with us. \n\n\n\nTo secure your spot in our training class\, please send an email including your full name\, your affiliated organization\, contact information\, and the name and date of the training you wish to attend. We look forward to having you! \n\n\n\nUS Offices:GDS Global Office (EU/TR):Dayton\, OH. | Mountainview\, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99\n\n\n\nEmail:  info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com\n\n\n\n\nMore Information\n\n\n\nClick this link to read details about the MIL-STD-810H Training\, including contents\, sessions\, and about the instructors.)
URL:https://www.globaldynamicsystems.com/event/mil-std-810h-training-on-environmental-testing-of-military-equipment-online-live-international-250204/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:MIL-STD-810H Training,Systems Engineering Training Courses
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/MIL-Aircraft-Taking-OFF-MIL-STD-810-Training-C17-Safety-Online-Class-1.png
ORGANIZER;CN="GDS Training Institute (EU)":MAILTO:info@globaldynamicsystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231019T090000
DTEND;TZID=UTC:20231021T170000
DTSTAMP:20260404T093531
CREATED:20220716T153402Z
LAST-MODIFIED:20231116T195725Z
UID:4023-1697706000-1697907600@www.globaldynamicsystems.com
SUMMARY:MIL-STD-810H: Training on Environmental Testing of Military Equipment [Online/Live | International\, English]
DESCRIPTION:Training on MIL-STD-810H Environmental Testing \n\n\n\nwith Tailoring Examples\n\n\n\nA Hands-on “Online” or “Onsite” Training ClassLed by a live\, U.S. based instructor \n\n\n\nMIL-STD-810HUS Department Of Defence Test Method StandardEnvironmental Engineering Considerations and Laboratory Tests\n\n\n\nGDS Engineering R&D\, Inc. provides online international training on MIL-STD-810H Environmental qualification testing of military equipment. Training focuses on the standard with tailoring examples. This training is an important step for testing and certifying your military equipment and products in accordance with MIL-STD-810H\, platform test requirements\, and other applicable standards and specifications.  \n\n\n\nThis page describes the contents of this two and half days of short training.program.You can also download the PDF file that describes the MIL-STD-810H training program. Click here to download the MIL-STD-810H Training Program Description Document. Dr Cicek is the main instructor of this training. Click here to read his bio page. \n\n\n\n\n Training Scope and Contents\nA good understanding of product testing in view of MIL-STD-810G/H and other relevant military standards.Overview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document.Establishment of Test Requirements and Test Plans.Test Procedures\, Scheduling\, Implementation\, and Test Reports.Tests are covered in detail per MIL-STD-810. Altitude\, temperature\, humidity\, shock\, vibration\, acceleration\, salt fog\, explosive atmosphere\, etc..Some of the MIL-STD-810H test methods are covered briefly; however\, we ensure all questions are answered for each test method.Cases studies\, sample reports and discussions on issues.Design issues and test failure discussions.Risk management for test results and acceptance criteria.Design Recommendations.\n\n\n\n Platform and equipment test examples are provided in each test method presentations and discussions\, including:  \n\n\n\nMilitary aircraft platforms (fixed and rotary wing)\, ground vehicles\, and navy shipsAvionics\, electrical and mechanical systems\, and structural project applicationsTest tailoring examples to include the selection of tests\, parameter levels\, and durationsConcepts of Operations (CONOPS) document and test curve establishment.Tailoring and Life Cycle Environmental Profile (LCEP)Mission ProfileFor tailoring\, read more at https://www.globaldynamicsystems.com/posts/mil-std-810h-training-tailoring-is-essential-explained/ \n\n\n\n\n\n \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.\n\n\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.
URL:https://www.globaldynamicsystems.com/event/mil-std-810h-training-on-environmental-testing-of-military-equipment-online-live-international-en/
CATEGORIES:Systems Engineering Training Courses,Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2022/02/GDS-MIL-STD-810H-Training-Program-Banner-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Helsinki:20231005T090000
DTEND;TZID=Europe/Helsinki:20231007T170000
DTSTAMP:20260404T093531
CREATED:20220505T130726Z
LAST-MODIFIED:20231116T201143Z
UID:2158-1696496400-1696698000@www.globaldynamicsystems.com
SUMMARY:MIL-STD-461G: Training on EMI/EMC Testing of Military Equipment [Online/Live | International\, English]
DESCRIPTION:An International ONLINE Training on EMI/EMC Testing with focus on: \n\n\n\nMIL-STD-461G\, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.Includes Overview of Relevant EMI/EMC Test Standards (MIL-STD-464\, MIL-STD-704\, MIL-STD-1275\, and RTCA-DO-160G Power Input) \n\n\n\nTraining Type: International / OnlineSatus: OPENDate: 5-7 October 2023 | Timezone: US CDT\,  UTC-5Time: Day1: 09:00 – 13:00\, Day 2/3: 09:00 – 17:00.  \n\n\n\nClick here to read all details about this training (MIL-STD-461G).\n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.\n\n\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.  \n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″] \n\n\n\n\n\n\n\n\n\nSystems Engineering Specialized Online Training Courses
URL:https://www.globaldynamicsystems.com/event/mil-std-461g-online-training-on-emi-emc-testing-of-military-equipment/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/Online-Training-on-MIL-STD-461G-Live-Design-Items-Included.png
ORGANIZER;CN="GDS Engineering R&D (Global)":MAILTO:imfo@GlobalDynamicSystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20230724T090000
DTEND;TZID=America/Halifax:20230728T123000
DTSTAMP:20260404T093531
CREATED:20221229T125303Z
LAST-MODIFIED:20230717T104834Z
UID:4279-1690189200-1690547400@www.globaldynamicsystems.com
SUMMARY:MIL-STD-810H: Training on Environmental Testing of Military Equipment [Online/Live/US Time\, CDT]
DESCRIPTION:Training on MIL-STD-810H Environmental Testing (5 days\, United States Central Day Time) by GDS Engineering R&D\, Inc. Dr. Ismail Cicek is the main instructor and the training is supported by associate instructors with test setup and test demonstrations. \n\n\n\n5 days of training schedule (US Central DayTime\, CDT) is as follows (UTC-5):1st day\, 24 Jul: 09:00 – 13:00\, 4 hrs. (UTC-5)2nd day\, 25 Jul: 09:00 – 13:00\, 4 hrs. (UTC-5)3rd day\, 26 Jul: 09:00 – 13:00\, 4 hrs. (UTC-5)4th day\, 27 Jul: 09:00 – 12:30\, 3.5 hrs. (UTC-5)5th day\, 28 Jul: 09:00 – 12:30\, 3.5 hrs (UTC-5) \n\n\n\nGDS Engineering R&D\, Inc. provides online international training on MIL-STD-810H Environmental qualification testing of military equipment. Training focuses on the standard with tailoring examples. This training is an important step for testing and certifying your military equipment and products in accordance with MIL-STD-810H\, platform test requirements\, and other applicable standards and specifications.  \n\n\n\nThis page describes the contents of this two and half days of short training.program.You can also download the PDF file that describes the MIL-STD-810H training program. Click here to download the MIL-STD-810H Training Program Description Document. Dr Cicek is the main instructor of this training. Click here to read his bio page. \n\n\n\n\n Training Scope and Contents\nA good understanding of product testing in view of MIL-STD-810G/H and other relevant military standards.Overview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document.Establishment of Test Requirements and Test Plans.Test Procedures\, Scheduling\, Implementation\, and Test Reports.Tests are covered in detail per MIL-STD-810. Altitude\, temperature\, humidity\, shock\, vibration\, acceleration\, salt fog\, explosive atmosphere\, etc..Some of the MIL-STD-810H test methods are covered briefly; however\, we ensure all questions are answered for each test method.Cases studies\, sample reports and discussions on issues.Design issues and test failure discussions.Risk management for test results and acceptance criteria.Design Recommendations.\n\n\n\n Platform and equipment test examples are provided in each test method presentations and discussions\, including:  \n\n\n\nMilitary aircraft platforms (fixed and rotary wing)\, ground vehicles\, and navy shipsAvionics\, electrical and mechanical systems\, and structural project applicationsTest tailoring examples to include the selection of tests\, parameter levels\, and durationsConcepts of Operations (CONOPS) document and test curve establishment.Tailoring and Life Cycle Environmental Profile (LCEP)Mission ProfileFor tailoring\, read more at https://www.globaldynamicsystems.com/posts/mil-std-810h-training-tailoring-is-essential-explained/ \n\n\n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\n5 days of training schedule is as follows:\n\n1st day\, 24 Jul: 09:00 – 13:00\, 4 hrs.\n2nd day\, 25 Jul: 09:00 – 13:00\, 4 hrs.\n3rd day\, 26 Jul: 09:00 – 13:00\, 4 hrs.\n4th day\, 27 Jul: 09:00 – 12:30\, 3.5 hrs.\n5th day\, 28 Jul: 09:00 – 12:30\, 3.5 hrs.\n\n\nTime zone: US Central Day Time (UTC-5)\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek)\n \nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRelation with RTCA-DO-160 Explained\nTraining will provide some comparison between military tests against the FAA/EASA certification test requirements covered in RTCA-DO-160. For example\, Fire Flammability will be covered in detail in this training. Differences in some test procedures\, for example\, Altitude\, Temperature\, Water Proofness / Rain / Immersion\, Humidity\, Contamination by Fluids\, Vibrations\, Shock and Crash Accelerations\, Icing Freezing\, and Salt Fog\, will be explained with rationale.Demonstrating the differences between DO160 and 810 is a great way of understanding the tailoring process iaw MIL-STD-810H. \n\n\n\n\n Relation with Industrial and Other Military Standards Explained \nIn some cases\, MIL-STD-810H tests may not be enough; especially when additional specific material requirements are concerned.Training covers a test standards session where examples from other military as well as industrial standards are explained briefly. This session provides an understanding into the rationale for choosing MIL-STD-810 test methods or other military/industrial standards. For example\, military or DO-60 Salt Fog test versus ASTM corrosion tests are explained with when and why you may need other tests.Test plans usually include EMI/EMC test procedures. Training will provide a short session with a general overview of the MIL-STD-461 testing and how to select procedures for your equipment and platform.\n\n\n\n\n\n\n\n\n\n\n\n\n Emphasis Given into Tailoring\nDeveloping a test plan wrt MIL-STD-810 testing might be confusing and if not it is definitely a time consuming process.Training will provide an understanding into why and when Concepts of Operations document is needed and how test requirements are established. This will be covered by both presentations and specific product examples in use in specific platforms.How to develop a Lifecycle Environmental Profile will be given by examples.In test method\, discussion will cover “what items” and “how” they will be tailored.\n\n\n\n\n\n\n Who Should Attend?\nProgram Managers to understand the test scheduling and planning. Also\, it is important for them to establish a “test review team”.Technical Leads and Requirements Managers to understand how to write correct test requirementsTest personnel to learn how to  implement the testsDesign teams to learn what to consider in their design to pass the testsPersonnel responsible for test plansDecision makers to understand the strategy when choosing certain test procedures in their product life cycle planning for target platforms and for marketing.All candidates of Systems Engineering professionals.\n\n\n\n\n\n\n Group Training or Individual Attendance\n A Group Training Might be a Good Option for your Organization?  \n\n\n\nTraining can be customized to your organizational needs. In such cases\, training could emphasize selected topics in more details with additional discussions and Qs & As.  Group trainings of 10 or more adds no additional cost.Group trainings of 15 or more\, discounts will apply.Maximum training class size is 20 in order to ensure the efficiency of the training.\n\n\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.  \n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.
URL:https://www.globaldynamicsystems.com/event/mil-std-810h-training-on-environmental-testing-of-military-equipment-online-live-2/
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230317T080000
DTEND;TZID=UTC:20230319T120000
DTSTAMP:20260404T093531
CREATED:20221229T105226Z
LAST-MODIFIED:20221229T120845Z
UID:4264-1679040000-1679227200@www.globaldynamicsystems.com
SUMMARY:RTCA-DO-160G: Training on Testing of Airborne Equipment and Certification Process | Online/Live | International (EN)
DESCRIPTION:RTCA-DO-160G: Training on Environmental and EMI/EMC Testing of Airborne Equipment and Certification Process (FAA/EASA) [Online/Live | International]\n\n\n\nTwo and a Half Days Online/Live International Training17-19 March 2023 | Cost: USD760.00\n\n\n\n\n\n\n\n\n\nTraining Summary Information\n\n\n\nTraining Content Details: Click to Display RTCA-DO-160 Training Contents Page  \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.  \n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″]
URL:https://www.globaldynamicsystems.com/event/rtca-do-160g-training-on-testing-of-airborne-equipment-and-certification-process-2/
CATEGORIES:RTCA-DO-160G Training,Sistem Mühendisliği Ürün Test ve Doğrulama Eğitimleri,Systems Engineering Training Courses,Systems Engineering V&V Training Courses (Open)
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220701T080000
DTEND;TZID=UTC:20220703T120000
DTSTAMP:20260404T093531
CREATED:20220208T145506Z
LAST-MODIFIED:20220616T154806Z
UID:3414-1656662400-1656849600@www.globaldynamicsystems.com
SUMMARY:MIL-STD-810H Training on Environmental Qualification Testing of Military Equipment | Online/Live | International (EN)
DESCRIPTION:Two and a Half Days Online/Live International TrainingJuly 1-2-3\, 2022Cost: USD760.00 \n\n\n\nTraining Type: International / OnlineSatus: OPENCourse Material: EnglishComm. Language: EnglishDate: 1-3 July 2022Time Schedule: Day 1 and 2: 08:00 – 16:30\, Day 3: 08:00 – 12:00. Timezone: Central European Summer Time (CEST). UTC+2 \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.\n\n\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.  \n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″]
URL:https://www.globaldynamicsystems.com/event/mil-std-810h-training-on-environmental-qualification-testing-of-military-equipment-online-live-international-en/
ORGANIZER;CN="GDS Engineering R&D (Global)":MAILTO:imfo@GlobalDynamicSystems.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20220520T080000
DTEND;TZID=UTC:20220522T120000
DTSTAMP:20260404T093531
CREATED:20220219T124516Z
LAST-MODIFIED:20220505T131928Z
UID:3561-1653033600-1653220800@www.globaldynamicsystems.com
SUMMARY:RTCA-DO-160G Online Training on Environmental and EMI/EMC Testing of Airborne Equipment (FAA/EASA) (20-22 May 2022) | Online/Live | International (EN)
DESCRIPTION:Training Type: International / OnlineSatus: OPENCourse Material: EnglishComm. Language: EnglishDate: 20-22 May 2022Time Schedule: Day 1 and 2: 08:00 – 16:30\, Day 3: 08:00 – 12:00. Timezone: Central European Summer Time (CEST). UTC+2 \n\n\n\nTwo and a Half Days Online/Live International TrainingMay 20-21-22\, 2022Cost: USD760.00 \n\n\n\nTraining Content Details: Click to Display RTCA-DO-160 Training Contents Page. \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\n\nRegistration Process\nTo register for a course\, do the following: \n\n\n\nIndividual/Group Registrations: \n\n\n\nTraining class size is limited with 12 attendees. Please ensure to reserve your seat with the following actions:  \n\n\n\n1. Review the Training Calendar and select the suitable training for you or for your organization.   \n\n\n\n2. Fill out the Training Registration Request Form\, below this page. We will send you the registration package\, via email\, including: \n\n\n\nRegistration form.Daily Training Plan with Sessions and Allocations to Each SubjectInformation about the Payment Process and Account NumbersInformation about the Class Material LinkInformation about the Training Attandance Link\n\n\n\nOrganizational (Closed) Trainings: \n\n\n\nPlease fill out the Training Registration Request Form\, below this page. Ensure to describe \n\n\n\nThe number of your personnel that will be planned for attandance (approximately)Preferred month (please mention with flexible dates) of the training to be scheduled.If there are any\, please specify  the subjects or application interests to emphesize in the training contents.\n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″]
URL:https://www.globaldynamicsystems.com/event/rtca-do-160g-online-training-on-environmental-and-emi-emc-testing-of-airborne-equipment-faa-easa-22-24-april-2022/
CATEGORIES:Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/11/Bombardier-RTCA-DO-160-Testing-Important-Step-for-Certification-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Moscow:20220224T090000
DTEND;TZID=Europe/Moscow:20220227T170000
DTSTAMP:20260404T093531
CREATED:20211230T151150Z
LAST-MODIFIED:20220114T150322Z
UID:2194-1645693200-1645981200@www.globaldynamicsystems.com
SUMMARY:Requirements Management: Online Training with Focus on FAA Requirements Engineering Management Handbook
DESCRIPTION:Reserved (Closed) training for an organization. Please review our training schedule or contact us for a group training. \nDOT/FAA/AR-08/32 Requirements Engineering Management Handbook \n3-days online training. \nTraining Schedule: \n\nTraining courses are provided online using ZOOM.\nAll registered users will receive the link for attandance 1 day before the course.\nAll registered users will receive a link to material site for course material before the class.\nSchedule is as follows (UTC+3)\nDay 1: 09:00 – 17:00\nDay 2: 09:00 – 17:00\nDay 3: 09:00 – 13:00\n\nThe FAA Handbook presents a set of recommended practices on how to collect\, write\, validate\, and organize requirements. It attempts to bring together the best ideas from several approaches\, organize them into a coherent whole\, and illustrate them with concrete examples that make their benefits clear.\nThe Handbook is targeted to the domain of real-time\, embedded systems and specifically to the avionics industry. It describes a set of recommended practices in which basic concepts can be practiced in isolation\, but reinforce each other when practiced as a whole. These practices allow developers to progress from an initial\, high-level overview of a system to a detailed description of its behavioral and performance requirements. Due to the growing importance of software in avionics systems\, these practices emphasize techniques to ease the transition from system to software requirements. \nConcrete examples are used throughout the Handbook to make the concepts clear\, but there are many other formats that could be used to obtain the same objectives. It is expected that most organizations wanting to use these practices will want to modify them\, perhaps significantly\, to integrate them with their existing processes and tools. \nRequirements Engineering Management Training (FAA/EASA/DOD/NASA) \n \nClick here to read more about the training contents\, daily program\, and about the instructors.
URL:https://www.globaldynamicsystems.com/event/online-requirements-management-training-with-focus-on-faa-requirements-engineering-management-handbook/
LOCATION:Reserved for an Organization – (Please Review Calendar for other OPEN training programs
CATEGORIES:Systems Engineering V&V Training Courses (Closed))
ATTACH;FMTTYPE=image/png:https://www.globaldynamicsystems.com/wp-content/uploads/2021/12/FAA-Requirments-Management-Handbook-Training-Program-by-Dr-Ismail-Cicek-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20220211T080000
DTEND;TZID=Europe/Paris:20220213T123000
DTSTAMP:20260404T093531
CREATED:20211230T112412Z
LAST-MODIFIED:20220208T181257Z
UID:2148-1644566400-1644755400@www.globaldynamicsystems.com
SUMMARY:RTCA-DO-160G: Training on Environmental and EMI/EMC Testing of Airborne Equipment (FAA/EASA Test Requirements) | Online/Live | International (EN)
DESCRIPTION:Cost: USD760.00 \n\n\n\n\n\n\nGDS Engineering R&D\, Inc. is an official member of the RTCA Organization. \n\n\n\n\nRTCA-DO-160G Online Training\, FAA/EASA Equipment Test Requirements. This training is an important step for testing and certifying your products in accordance with the FAA/EASA test requirements.\n\n\n\n2.5 Days\, Hands-on\, “Online” or “Onsite” Training Class. Led by live\, two instructors. \n\n\n\n\n\nTraining Schedule and Execution Type\n\n\nTraining Type: International / Online\nSatus: Seats are avaiable now.\nOnline training using ZOOM.\nLed by a live\, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)\nA usual 2.5 days of training schedule is as follows:\n\n\n\n1st Day: 09:00 – 13:00\n\n\n\n\n2nd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\n3rd Day: 09:00 – 17:00 (Lunch Break between 12:30 and 13:30)\nTime zone: Central Daylight Time (US CDT\, UTC-5)\n\n\nEnding time may vary+/-30 minutes depending on the length of the discussions.\nCourse Material: English\nComm. Language: English\nMaterial: Registration includes all presentations and additional material (English) shared before the class.\nAttandance: The link for online class is distributed to registered trainees upon registration.\nAttendees will receive a Training Certificate.\nTraining includes knowledge check quizzes\, a competition type fun way or learning.\n\n\n\n\n\n\n\nClick to read detail information about this training:https://www.globaldynamicsystems.com/systems-engineering-training-courses/training-on-rtca-do-160g-testing/\n\n\n\nDowload the PDF File: RTCA-DO-160G Training Description.PDF\n\n\n\n\n\n\n\nHere is a Summary Information:\n\n\n\nInternational Training with a focus on the test standard document“RTCA-DO-160G Environmental Conditionsand Test Procedures for Airborne Equipment© 2010\, RTCA\, Inc.” \n\n\n\nThis training is an important step fortesting and certifying your products in accordance with the FAA/EASA test requirements.\n\n\n\nA good understanding of product testing in view of RTCA-DO-160GOverview of Systems Engineering\, V&V\, and Concepts of Operations (CONOPS) document and relations with RTCA-DO-160 testingPart 21 and FAA/EASA RegulationsTest Requirement ReferenceTest Category SelectionsTest Procedures\, Scheduling\, Test Implementation and Review of Test ReportsTest Sections (Environmental & EMI/EMC): All test sections are covered with detail discussions except several tests\, such as Fungus Tesing and Waterproofness are discussed in summary with important aspects.Discussions include design issues\, test failures\, and recommendationsA session with Risk Management Method includes how to resolve a test result that may not be a failure\, i.e. anomalies.\, with a process that we recommend.Importance of establishing Integrated Product Team (IPT) or with another name “Test Review Team” for reviewing test plans and results and identifying the next step when issues are encountered.Design Recommendations are emphasized in each test section.Additional or alternative (standards and tests) are recommended for certain cases.\n\n\n\nOur Instructors share their experience and knowledge gained by working long years in the field with designing products and performing tests in accordance with such as RTCA-DO-160\, MIL-STD-810\, and MIL-STD-461. The slides are supported by many graphics and test videos for the efficiency and clarity of the information and each session is planned in accordance with the sections in RTCA-DO-160G.\n\n\n\n\nAbout the Instructors\nThe main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions. \n\n\n\nA Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.  \n\n\n\nOur experienced personnel also support our training programs. They are actively participating in the environmental testing of products. \n\n\n\nDr. Ismail Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas\, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.He gained engineering and leadership experience by working in the United States Department of Defence projects and programs as systems development engineer for 15 years. He led the development of various engineering systems for platforms including C-5\, C-17\, KC-10\, KC-135\, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.  Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB\, OH. He received many important awards at the positions he served\, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC)\, signed by the commander in charge. \n\n\n\nDr Cicek also established a test lab\, called Marine Equipment Test Center (METC)  and located  at Istanbul Technical University\, Tuzla Campus\, for testing of equipment per military and civilian standards\, such as RTCA-DO-160. Providing engineering\, consultancy\, and training services to many companies and organizations\, Dr. Cicek has   gained a  great insight into the tailoring of standard test methods in accordance with military standards\, guides\, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.Dr. Cicek also completed various product and research projects\, funded in the USA\, EU\, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty\, Tuzla/Istanbul. He is the founding manager of the METC in Tuzla Campus of ITU. Meanwhile\, he provided engineering services\, consultancies\, and training to many organizations for product development\, engineering research studies such a algorith development\, test requirements development\, and test plans and executions.Dr Cicek worked as the Principle Investigator and became a Subject Matter Expert (SME) at the US Air Force Aeromedical Test Lab (WPAFB/OH) for certifying the products to the US Air Force Platform Requirements. He also developed Joint Enroute Care Equipment Test Standard (JECETS) in close work with US Army Test Lab engineers and managers.Read DAU Paper: “A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification”. Click to display this report.Connect with Dr Ismail Cicek: Linkedin Page \n\n\n\nClick here to read more about Dr Cicek’s professional studies.  \n\n\n\n\n\n\n Training Registration Request Form \n\n\n\nPlease fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs. \n\n\n[contact-form-7 id=”7c573b2″ title=”Training Request Form 1″]
URL:https://www.globaldynamicsystems.com/event/rtca-do-160g-training-on-testing-of-airborne-equipment-faa-easa/
LOCATION:Online Training via ZOOM\, ZOOM Link and Training Material will be shared with the registrants
CATEGORIES:Systems Engineering Training Courses (Open),Systems Engineering V&V Training Courses (Open)
ATTACH;FMTTYPE=image/webp:https://www.globaldynamicsystems.com/wp-content/uploads/2021/12/Mitigate-your-risks-before-they-actually-happen-MIL-STD-810H-Training-STD-461-RTCA-DO-160G-1.webp
ORGANIZER;CN="GDS Engineering R&D (Global)":MAILTO:imfo@GlobalDynamicSystems.com
END:VEVENT
END:VCALENDAR