MIL-STD-461G EMI/EMC Online Training [EU EST Timezone]
2025-04-30 08:00 - 2025-05-02 12:00 UTC | Online Training via ZOOM
MIL-STD-461G Training on the EMI/EMC Testing of Military Equipment [Online/Live], with focus on:

MIL-STD-461G, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment.

Including the overview of the relevant EMI/EMC test standards: MIL-STD-464, MIL-STD-704, MIL-STD-1275, and RTCA-DO-160G Power Input.

Training Type: International / OnlineSatus: OPENDate: 30 April – 2 May, 2025 | Timezone: EST (European Standart Time) UTC+1.Time: Day1/2: 08:30 – 16:30, Day 3: 08:00 – 12:00.

Click here to read all details about MIL-STD-461G training with detailed contents)

Training Type: International / Online

Satus: Seats are avaiable. Early bird (1-month in advance) registrations will receive 10% discount.

Online training via ZOOM.

Led by a live, U.S. based instructor (Dr Ismail Cicek) (PDF) (Download PDF)

A usual 2.5 days of training schedule is as follows:

Day 1: 08:00 – 11:30 | 13:00 – 16:30

Day 2: 08:00 – 11:30 | 13:00 – 16:30

Day 3: 08:00 – 11:30

Time zone: EST (European Standart Time). UTC+1

Ending time may vary+/-30 minutes depending on the length of the discussions.

Course Material: English | Comm. Language: English

Material: Registration includes all presentations and additional material (English) shared before the class.

Attandance: The link for online class is distributed to registered trainees upon registration.

Attendees will receive a Training Certificate.

Training includes knowledge check quizzes, a competition type fun way or learning.

Training Contents

2.5 days of training covers the following topics:

EMI/EMC Training, Opening Session

General understanding of EMI and EMC.

Introductory Design Considerations: Grounding, Bonding, and Shielding.

MIL-STD-461G Standard General OverviewIntroduction & History

MIL-STD-461: General overview, definitions, nomenclature, purposes, language, and scope

MIL-STD-461 Contents Overview

General and detailed requirements

Selection of test methods and procedures based on the platform and equipment type

MIL-STD-461G – CE Tests (Part I)

Conducted Emissions Test Methods CE101, CE102, CE106

Example Test Results and Report Reviews

Q&As

MIL-STD-461-G – CE Tests (Part II)

Conducted Emissions Test Methods CE101, CE102, CE106

Example Test Results and Report Reviews

Q&As

MIL STD 461G – CS Tests (Part I)

Conducted Susceptibility Test Methods CS101, CS103, CS104, CS105, CS109

Example Test Results and Report Reviews

Q&As

MIL STD 461G – CS Tests (Part II)

Conducted Susceptibility Test Methods CS114, CS115, CS116, CS 117, CS 118

Example Test Results and Report Reviews

Q&As

Product Development and Certification ProcessUS DOD Systems Engineering V&V Processes, R&D Project vs. End Product

Certification Process (MIL-STD-461, MIL-STD-464, MIL-HDBK 516, US DOD )

USAF and US Army EMI/EMC Test and Certification Process

FAA/EASA Part 21 ve Certification Process

Documentation, Test Plans, and Test Reports

Test Plan Examples

Test Results and Risk Assessment

Test Reports

US DOD Data Items (DI) Forms and Data Item Descriptions (DID), governmental and non-governmental documentation

MIL-STD-464 Standard

MIL-STD-461 vs MIL-STD-464

EMI/EMC Platform Level Requirements Review

MIL-STD-464 Guides: Requirements Rationale and Lessons Learnt Items

MIL-STD-461G RS Tests

Radiated Susceptibility Test Methods RS101, RS103, RS105

Example Test Results and Report Reviews

Q&As

MIL-STD-461G RE Tests

Radiated Emissions Test Methods RE101, RE102, RE103

Example Test Results and Report Reviews

Q&As

EMI/EMC & Equipment Design

EMI/EMC and Equipment Design

EMI/EMC Analysis Software Programs and Application Examples

EMI/EMC Analysis Test Programs

Additional Tests (RTCA-DO-160)

Power Input, RTCA-DO-160G Section 16

Magnetic Effect, RTCA-DO-160G Section 15

Lightning Direct Effects, RTCA-DO-160G Section 23

Other Relevant Test Standards, Brief SummaryMIL-STD-464D Electromgnetic Environmental Effects, Requirements for SystemsMIL-STD-704F Aircraft Electric Power Characteristics

MIL-STD-1275E Interface Standard, Characteristics of 28 Volt DC Input Power to Utilization Equipment in Military Vehicles

MIL-STD-1399 Interface Standard, Section 300, Part 1 Low Voltage Electric Power, Alternating Current

MIL-STD-1399 Interface Standard, Section 300, Part 2 Medium Voltage Electric Power, Alternating Current

All MIL-STD-461G test sections are discussed and explained in detail, includingThe Purpose of the TestTest Configurations and General RequirementsTest Requirements and Procedures

EMI Test Chamber

Test Setup: Test Setup (Tabletop) / Test Setup (Free Standing)

Measurement Tolerances

Interpretation of the Test Results and Example Test Report Reviews

Issues that might be observed with recommendations (based on design experience).

Instructors

The main instructor of the training is Dr Ismail Cicek. An Avionics Chief Engineer (EE) who is also a Certified Verification Engineer (FAA/EASA) also assists the trainings. Our experienced test personnel also becomes avialable for demonstrations and discussions.

A Certified Verification Engineer (CVE) iaw FAA/EASA and with 18 years of experience. He has worked as the avionics systems chief engineer in product development of avionics systems. He is also experienced in the product testing per environmental and EMI/EMC standards and FAA/EASA certification processes.

Our experienced personnel also support our training programs. They are actively participating in the environmental testing of products.

Registration

We provide both face-to-face and online training programs. For registration to a course or custom training requests for your organization, please get in touch with us.

To secure your spot in our training class, please send an email including your full name, your affiliated organization, contact information, and the name and date of the training you wish to attend. We look forward to having you!

US Offices:GDS Global Office (EU/TR):Dayton, OH. | Mountainview, CAPh. +1 (937) 912-1220ITU ARI Teknokent | GTU TeknoparkPh. +90 546 934 95 99

Email: info@GlobalDynamicSystems.comwww.GlobalDynamicSystems.com

More Information

Please enable JavaScript in your browser to complete this form.
you for the

Name *FirstLastEmail *Type in the information for the training you are insterested in: *Please provide us your training interest with enough information, for example, the training name and date of the training.

For Individual Training, type in the training name and date of the training you would like to participate.

For group training requests and quotes, please type
– your interested training name,
– approximate number of attendees
– training type (online or face-to-face)

Please provide enough information for other training requests.

Thank you.Submit
