GDS Systems Engineering Training Programs. Online Training. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Tailoring of the MIL-STD-810H test methods and procedures. EUT. Equipment Under Test. Online Classes. US based intructor. US DOD. EASA. FAA. NASA. Miliary Stanrdards. Askeri Test Standartları. Çevresel Test Standart Eğitimi. Eğitim. Acceleration Testing. Aircraft Systems. RTCA-DO-160. Crash Hazard. Korozyon Testleri. Corrosion Tests. Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule.

Electro-Magnetic Compatibility (EMC) of Marine Devices and Electrical Equipment

Devices used onboard a ship are exposed to harsh electromagnetic environments, whether in the propulsion, deck or bridge area of a ship. Testing of such devices for Electro-Magnetic Compatibility (EMC) is therefore very important. Otherwise, manufacturers can face difficulties during the certification and procurement stages.

EMC testing and certification  services to ensure your marine products comply with relevant international standards and regulations is a MUST!

GDS Engineering R&D does not perform these tests yet; however, have the information on design and test knowledge. The requirements include the international conventions as agreed by the International Maritime Organization (IMO) for Safety of Life at Sea (SOLAS).

Currently, we have observed that these tests are conducted by reputable agencies like ELEMENT.

The testing laboratories use the following standards to test the marine electronic, digital or electrical devices for certification to IMO SOLAS requirements, guidance, or recommendations:

  • IEC 60945
  • IEC 60533
  • Lloyds Register Test Spec No 1
  • DNV Certification Notes 2.4
  • IEC 60092

Click this link to read more about ELEMENT’s advertisements.  Element also provides the following additional information in their website:

Support and guidance from the initial design stage

The use of composite materials in ship construction together with new radio technologies and high power electronics are changing the requirements and design goals that need to be achieved to ensure electromagnetic compatibility.  Element is well placed with our knowledge of both standards and the target environment to provide detailed guidance of the best compliance strategies to adopt for your marine products.

CE Marking and Wheel Mark certification

Element performs EMC testing in conjunction with climatic and environmental test requirements to meet dedicated marine standards and be compliant with CE marking legislation. We make sure your marine equipment complies with the relevant EMC standards listed in the Marine Equipment Directive to help you achieve the Wheel Mark certification.

EMC test plans
Online Training on MIL-STD-810H, RTCA-DO-160, MIL-STD-461G, MIL-STD-704 Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Training Led by a Live US-based Sr. Instructor: Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. FAA Requirements Management. Efficient way of learning. Continues Education. Class Material.

Our test facilities for both EMC and environmental provide a comprehensive portfolio of tests to ensure that whatever your marine equipment is, and no matter where it’s located, we have a test solution that matches your needs.

Coordinated approach to testing for global market access

Our expertise comes from testing thousands of different products every year, and our industry-leading capacity allows us appropriate coordination of testing, so your marine equipment meets common standards of safety and performance across the EU and is accepted for entry into world markets.

For more information, we currently advice you contact with Element support desk.

GDS Systems Engineering Training Programs. Online Training. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Tailoring of the MIL-STD-810H test methods and procedures. EUT. Equipment Under Test. Online Classes. US based intructor. US DOD. EASA. FAA. NASA. Miliary Stanrdards. Askeri Test Standartları. Çevresel Test Standart Eğitimi. Eğitim. Acceleration Testing. Aircraft Systems. RTCA-DO-160. Crash Hazard. Korozyon Testleri. Corrosion Tests. Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. DOT/FAA/AR-08/32. Requirements Engineering Management Handbook. U.S. Department of Transportation Federal Aviation Administration.

Requirements Management: Online Training with Focus on FAA Requirements Engineering Management Handbook

February 24, 2022 @ 9:00 am February 27, 2022 @ 5:00 pm

GDS Systems Engineering Training Programs. Online Training. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Tailoring of the MIL-STD-810H test methods and procedures. EUT. Equipment Under Test. Online Classes. US based intructor. US DOD. EASA. FAA. NASA. Miliary Stanrdards. Askeri Test Standartları. Çevresel Test Standart Eğitimi. Eğitim. Acceleration Testing. Aircraft Systems. RTCA-DO-160. Crash Hazard. Korozyon Testleri. Corrosion Tests. Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. DOT/FAA/AR-08/32. Requirements Engineering Management Handbook. U.S. Department of Transportation Federal Aviation Administration.

Reserved (Closed) training for an organization. Please review our training schedule or contact us for a group training.

DOT/FAA/AR-08/32 Requirements Engineering Management Handbook

3-days online training.

Training Schedule:

  • Training courses are provided online using ZOOM.
  • All registered users will receive the link for attandance 1 day before the course.
  • All registered users will receive a link to material site for course material before the class.
  • Schedule is as follows (UTC+3)
  • Day 1: 09:00 – 17:00
  • Day 2: 09:00 – 17:00
  • Day 3: 09:00 – 13:00

The FAA Handbook presents a set of recommended practices on how to collect, write, validate, and organize requirements. It attempts to bring together the best ideas from several approaches, organize them into a coherent whole, and illustrate them with concrete examples that make their benefits clear.
The Handbook is targeted to the domain of real-time, embedded systems and specifically to the avionics industry. It describes a set of recommended practices in which basic concepts can be practiced in isolation, but reinforce each other when practiced as a whole. These practices allow developers to progress from an initial, high-level overview of a system to a detailed description of its behavioral and performance requirements. Due to the growing importance of software in avionics systems, these practices emphasize techniques to ease the transition from system to software requirements.

Concrete examples are used throughout the Handbook to make the concepts clear, but there are many other formats that could be used to obtain the same objectives. It is expected that most organizations wanting to use these practices will want to modify them, perhaps significantly, to integrate them with their existing processes and tools.

Requirements Engineering Management Training (FAA/EASA/DOD/NASA)

Click here to read more about the training contents, daily program, and about the instructors.

Reserved for One Organization (Please Review Calendar for other OPEN training programs

Global Dynamic Systems. GDS Systems Engineering Training Programs. Simulators. Engine Room Simulator (ERS). Ship. Electrical Systems Simulator. Physics Lab. UH60. Amphibious. Ground Vehicles. Military Training Programs. MIL-STD-810H Online Training. Environmental Testing of Military Products. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Ship Engine Room Simulator (ERS) SERS GDS Engineering R&D IMO STCW 2010, Engine Performance, Main Diesel Engine, Marine, Maritime, IMO Model Course 2.07. Certified by Class NK. ITU Maritime Faculty. Yıldız Technical University. Competencies. Operation and Management Level. Education and Training. Assessment of Marine Engineers. Troubleshooting with Fault Tree Scnearious and Analysis Reporting. Maritime. Marine Engineering.

GDS Mühendislik ARGE San. Tic. Ltd. Şti. (GDS Engineering R&D, Inc.)

GDS Mühendislik ARGE San. Tic. Ltd. Şti., 2014 yılında Teknopark istanbul’da kurulmuş olan bir ArGe firmasıdır.

Kısa adıyla GDS;

Denizcilik sektöründe simülatör ürünleri geliştirmekte, özelllikle denizcilik eğitimlerinde kullanılmak üzere Gemi Makine Dairesi (Ship Engine Room Simulator) ve benzeri simülatörler geliştirmektedir. GDS’nin ana ürünü olan Ship Engine Room Simulator (SERS), marka tescili tamamlanmış ve uluslararası denizcillik sertifikasyon ajansı olan ClassNK tarafından sertifikalanmıştır. SERS, Yıldız Teknik Üniversitesi, One Yachts, ve İstanbul Teknik Üniversitesi gibi önemli denizcilik eğitim kurumlarında kullanılmaya başlanmıştır. GDS, SERS yanında Gemi Elektrik Sistemleri Simülatörü gibi diğer denizcilik eğitim simülatörleri de geliştirmiş ve çalışmalarına devam etmektedir.

GDS, Denizcilik Sektörü‘nde projeye özel, bilgi ve tecrübeye dayalı, danışmanlık hizmetleri de vermektedir. ARKAS BIMAR’a ait TÜBİTAK projesi ile Makine Öğrenmesi konulu çalışma devam etmektedir. Karadeniz Holding (Karpowership)’e ait bir gemi için denize yayılan gürültü ölçümü ve analizleri konulu bir çalışma ve uluslararası geçerli bir rapor çalışması yapmıştır. Benzer mühendislik ve danışmanlık çalışmaları ile denizcilik sektörüne hizmetlerimiz devam etmektedir.

Havacılık Sektörü‘ne ait olarak GDS personeli, RTCA-DO-160 Çevresel Test Standardı eğitimi vermekte, bu standarda göre test planı ve testlerin yönetilmesi konusunda hizmet vermektedir.

Savunma Sektörü’nde çok önemli olan MIL-STD-810H konusunda uluslararası deneyimlere sahip okan GDS, bu konuda eğitimler vermekte ve test planı, test gereksinimleri hazırlanması, ve test projelerinin yürütülmesi konusunda sektöre hizmet vermektedir.

GDS personeli aynı zamanda İTÜ Denizcilik Fakültesi’nde akademik kadroda bulunan kişilerden oluşmakta olup İTÜ Denizcilik Test Uygulama ve Araştırma Merkezi’nde (İTÜ DETAM), üniversite-sanayi işbirlikleri kapsamında test, danışmanlık ve mühendislik hizmetleri sunmaktadır. İngilizce adıyla İTÜ Marine Equipment Test Center (METC), titreşim, sıcaklık, buzlandırma, düşürme, istif, iç basınç, çekme, çentik, sızdırmazlık, tuz sisi gibi çevresel testleri yapabilmektedir.

GDS, ürünleri ve bilgi-deneyim potansiyeli ile global çalışmalara katkı vermeye devam etmektedir.

GDS’ye ait ürünler ve çevrimiçi verilen eğitimler aşağıda listelenmiştir.

GLOBAL DYNAMIC SYSTEMS (GDS)
TRAINING COURSES
Worldwide, Online, for ‘Groups’ or ‘Individuals’

Training on
MIL-STD-810H
ENVIRONMENTAL TESTING

Training on
EMI/EMC Testing
(per RTCA-DO-160 & MIL-STD-461)

Training on
Vibration and Shock
Testing

Training on
Systems Engineering
(DoD/FAA/NASA/EASA)

Training on
RTCA-DO-160G
ENVIRONMENTAL TESTING

Training on
MIL-STD-461G EMI/EMC Testing
(incl. MIL-STD-464)

Training on
Requirements Management
(FAA/EASA/US DoD/NASA)

Training on
MIL-STD-704F
Aircraft Electrical Interface


OUR REFERENCES

We have provided training and test consultancy services to more than 100 companies and organizations and over 500 individual trainees so far.

GDS Engineering R&D provides systems engineering training courses. Provided RTCA-DO-160G Training at Turkish Technique (HY Teknik)GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!SST Flugtechnik GmBH LogoRaytheon, in Dallas TX, Provided Product Verification and Validation PhD Course in 2009 by Dr Ismail Cicek as part of the Texas Tech & Raytheon PhD Study on Systems Engineering
GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!ARMERKOM Logo - MIL-STD-810 Training Provided by GDS Engineering, NAVY, Donanma, Egitim Test Çevresel TestlerMIL-STD-810 Egitimi DzKK LogoGDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!USAF_-_Aeronautical_Systems_Center Acceleration Test MIL-STD-810 Consultancy
GDS Systems Engineering Training Programs. Online Training. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Tailoring of the MIL-STD-810H test methods and procedures. EUT. Equipment Under Test. Online Classes. US based intructor. US DOD. EASA. FAA. NASA. Miliary Stanrdards. Askeri Test Standartları. Çevresel Test Standart Eğitimi. Eğitim.  Acceleration Testing. Aircraft Systems. RTCA-DO-160. Crash Hazard. Korozyon Testleri. Corrosion Tests. Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. DOT/FAA/AR-08/32. Requirements Engineering Management Handbook. U.S. Department of Transportation Federal Aviation Administration. Tailoring Guidance. Tailoring per MIL-STD-810H Testing. Tailoring for MIL-STD-810H Testing. MIL-STD-810H Tailoring Examples. Acceleration and Shock Tests, Sled Testing. Vibration testing of a Waterjet Turbine.STM. GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!TUBITAK BILGEM Logo - MIL-STD-810 Training Egitim Env Test. GDS Systems Engineering Training Programs. Online Training. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Tailoring of the MIL-STD-810H test methods and procedures. EUT. Equipment Under Test. Online Classes. US based intructor. US DOD. EASA. FAA. NASA. Miliary Stanrdards. Askeri Test Standartları. Çevresel Test Standart Eğitimi. Eğitim. Acceleration Testing. Aircraft Systems. RTCA-DO-160. Crash Hazard. Korozyon Testleri. Corrosion Tests. Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. DOT/FAA/AR-08/32. Requirements Engineering Management Handbook. U.S. Department of Transportation Federal Aviation Administration. Tailoring Guidance. Tailoring per MIL-STD-810H Testing. Tailoring for MIL-STD-810H Testing. MIL-STD-810H Tailoring Examples. Acceleration and Shock Tests, Sled Testing. Vibration testing of a Waterjet Turbine.
GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!CTECH Logo. GDS Systems Engineering Training Programs. Online Training. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Tailoring of the MIL-STD-810H test methods and procedures. EUT. Equipment Under Test. Online Classes. US based intructor. US DOD. EASA. FAA. NASA. Miliary Stanrdards. Askeri Test Standartları. Çevresel Test Standart Eğitimi. Eğitim.  Acceleration Testing. Aircraft Systems. RTCA-DO-160. Crash Hazard. Korozyon Testleri. Corrosion Tests. Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. DOT/FAA/AR-08/32. Requirements Engineering Management Handbook. U.S. Department of Transportation Federal Aviation Administration. Tailoring Guidance. Tailoring per MIL-STD-810H Testing. Tailoring for MIL-STD-810H Testing. MIL-STD-810H Tailoring Examples. Acceleration and Shock Tests, Sled Testing. Vibration testing of a Waterjet Turbine.
BMC Power Log. GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810,  RTCA-DO-160), MIL_STD-461 since 2009!GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!
GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810H and RTCA-DO-160G) since 2009!
GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!GDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810H and RTCA-DO-160G) since 2009!
tulomsas, Ismail Cicek, Systems Engineering Training Studies, 2014-2015 TÜLOMSAŞ LOGOGDS Engineering R&D has been providing systems engineering training courses (such as MIL-STD-810 and RTCA-DO-160) since 2009!MILPER, Project Studies with Dr Ismail Cicek 2012-2014, Maritime Propeller R&D, Development and Testing

References of GDS Simulator Users
&
Solution Partners
in
Maritime Training and Research

Engine Room Simulator (ERS). Ship Engine Room Simulator. IMO STCW 2010 Training. Marine Engineering Cadets. Maritime. IMO Model Course 2.07. Online Training. COVID-19. Certified by Class NK, IACS Member. Maritime Education and Training (MET)Engine Room Simulator (ERS). Ship Engine Room Simulator. IMO STCW 2010 Training. Marine Engineering Cadets. Maritime. IMO Model Course 2.07. Online Training. COVID-19. Certified by Class NK, IACS Member. Maritime Education and Training (MET). Containership. Yacht Taining. Tanker Personnel.Engine Room Simulator (ERS). Ship Engine Room Simulator. IMO STCW 2010 Training. Marine Engineering Cadets. Maritime. IMO Model Course 2.07. Online Training. COVID-19. Certified by Class NK, IACS Member. Maritime Education and Training (MET). Containership. Yacht Taining. Tanker Personnel.
tülomsaş, R&D study, Milli Dizel Motoru Çalışması, ARGE, TÜBİTAK, Dizel Motorlarda Verimlilik, İTÜAkademi Maritim Penjana ilmuNorth Star Enterprise Bangladesh
Engine Room Simulator (ERS). Ship Engine Room Simulator. IMO STCW 2010 Training. Marine Engineering Cadets. Maritime. IMO Model Course 2.07. Online Training. COVID-19. Certified by Class NK, IACS Member. Maritime Education and Training (MET). Containership. Yacht Taining. Tanker Personnel.Engine Room Simulator (ERS). Ship Engine Room Simulator. IMO STCW 2010 Training. Marine Engineering Cadets. Maritime. IMO Model Course 2.07. Online Training. COVID-19. Certified by Class NK, IACS Member. Maritime Education and Training (MET). Containership. Yacht Taining. Tanker Personnel.
Engine Room Simulator (ERS). Ship Engine Room Simulator. IMO STCW 2010 Training. Marine Engineering Cadets. Maritime. IMO Model Course 2.07. Online Training. COVID-19. Certified by Class NK, IACS Member. Maritime Education and Training (MET). Containership. Yacht Taining. Tanker Personnel.tuzeks gds Engine Room Simulator (ERS) Engine Tests, Vibration Testing, Consultancy, KOSGEB Project
Simulator Studies in Cooperation between SDT and GDS Engineering R&DMILPER, Project Studies with Dr Ismail Cicek 2012-2014, Maritime Propeller R&D, Development and Testing
Karpowership logo - GDS Engineering R&D Services Karadeniz Holding