IMO Model Course Exercise recommends students learn the weather change effect on engine performance.
GDS Engineering R&D developed a modern Engine Room Simulator (ERS) and it is in use by various research and training institutions. GDS ERS, called SERS, includes all engine room, ship, and environmental paramaters to demonstrate the weather effect to engine performance while onboard systems are maintaining their status with the displayed parameters. This scenario study is a predefined and set in the ERS for instructors to directly apply in their STCW Management Level Exercises. Student Workbooks accomodate this exercise with specficic forms to fill by the trainees.
Purpose: Exercise the weather effect to engine performance using the Ship ERS. Generate a report with capturing the images using SERS GUI panels and tools provided. Note that this exercise is generated as part of the IMO Model Course 2.07 (2017 Edition) exercises. This training exercise was developed as part of the IMO STCW 2010 Management Level objectives using the Model Course 2.07 guidelines ans steps.
Note: This classroom exercise was provided in this page as an example. Click here to visit the Ship Engine Room Simulator product to read more.
Step 1: ERS is operated in Navigation Mode and Ballast Transfer System is lined up for ballast operations. Draft is Low (i.e. d=9 m.)
Step 2: ME Processes GUI Panel displays the ME Parameters while the draft is increasing. Check Figure 2 for that the the baseline (sea test) data/graphs are displayed. Being able to understand the ME performance graphs are important in this exercise.
Step 3: Ensure the control of the main engine is set to “RPM”.
Step 4: Graphs and Plots GUI Panel displays the trend data for the selected parameters. In this exercise, it is important to plot the draft and ME Power. Additionally, it is important to select the ME Power versus ME RPM in the X-Y plot area to see the ME Power change while the RPM is controlled.
Step 5: Status of the Ballast Tanks and Levels are important to observe.
Step 6: Students should be able to interpret time (trend) and X-Y graphs for this operation, as part of the MANAGEMENT LEVEL exercise objectives.
Step 7: Complete the exercise with noting the ME parameter changes.
GDS Engineering R&D is a research and development company, established by the academicians employed at Istanbul Technical University Maritime Faculty, Tuzla, Istanbul. GDS SERS Development Team has been utilizing engine room simulators since 2001, every year for training of marine engineering students with the following two engineering courses:
ERS I Operational Level Simulator Course: This course is for STCW Operational Level Proficiency Training after completing other Operational Level Courses at 4-year-university level. It is 4 hrs a week continuing for 14 weeks per semester. Each student must take this course to be eligible for long term training onboard a ship.
ERS II Management level Simulator Course: This course is to satisfy the proficiency levels for Management Level. It is 3 hours for 14 weeks and each student must complete the onboard training and then after completing this class for graduation.
Through using simulators in both of these courses since 2001, we gained a good level of expertise on the use of simulators in Maritime Education & Training. Our team has also provided Training of Trainers courses IMO Model Courses 6.09 and 6.10. Some of our team members provided on site training at other Turkish institutions and became experienced on using simulators developed by various manufacturers.
Experienced in academic, engineering, and simulator courses, we have started describing a new simulator, aiming to provide an engine room simulator with the following important characteristics:
Reduction of Learning Time of the Software to Focus on Engine Room Systems Training:
Having different mouse key assignments or keyboard shortcuts in a simulator for various software functions and controls make the software much more complex to use and that affect the training objectives negatively. Therefore;
SERS provide a much less complex user interface allowing trainees focus on the professional tasks for “running the engine room systems” rather than “running the simulator.”
All GUI panels are easily displayed or closed:
“1-Click” Approach for ease of use:
All sysems are operated with a left mouse click.
All software functions are activated with a left mouse click.
All selections are made with a left mouse click.
No hidden functions or keys to use for activating a specific panel.
Fidelity and Realism
Having a more accurate approach on how to display and how to operate the systems and components.
Realistic functionality of pumps, compressors, engines, etc. with mathematical modeling reflecting the realistic time durations and process dynamics.
Realistic remote and local control for the pumps and compressors.
Realistic graphical user interface for electrical system (Circuit Breakers, Remote Panels, Synchronization Panel, etc.)
Piping and Instrumentation Diagram (P&ID) objects, such as valves, are designed and shown in accordance with the respective international standards. Also, real engine rooms are studied to understand and display the controls, valves, and similar objects with a more understandable object design.
Pipe colors are selected to fit to the international standards. This provides a more comprehensive maritime education approach and ensures enough practice opportunity for diagram reading in the real engine room.
Components are created with various drawing and design software packages, then they are animated for better understanding, and better on-off state indications. For example, trainee could understand a pump is turning and could see there is a flow in a pipe with both color change and observed parameters.
Enough/necessary parameters displayed to understand the engineering principles.
Emphasis on Safety Systems (CO2 Fixed Fire Installation system is included as a separate panel)
Emphasis on Upcoming Regulations or Technology (Inclusion of ME Denoxification system as a separate panel).
Basic sounds (alarms and engine sounds) are implemented. Alarms are implemented appropriately as in the real environment with SILENCE, ACKNOWLEDGE and RESET buttons.
Unique Assessment Features
SERS provides direct evaluation methods with objective evidence of training with the following training outputs:
A text based training report generated for each trainee for each training session.
Screen captures generated for each user action and recorded in a historic time order, allowing to monitor and display the complete flow of the trainee actions.
Instructor monitoring and reaction time display and record for each trainee.
Trainee tools to easily record and maintain the training records.
More Accurate Philosphy is developed for use of SERS for a more Efficient and Realistic “Team Management” Training
“Repeating all functions in distributed computers” approach cause students tend to complete all training functions from one computer only. However;
SERS architecture allow for distributing panels to different units without repeating. Student must complete the task from its designated location.
Ship Engine Room Simulator (Ship ERS or SERS™) is certified to meet both IMO STCW 2010and IMO Model Course 2.07 Exercise Requirements
SERS™ User Manuals
SERS™ is provided with a total of seven (7) user manuals, student exercise workbooks, and documents as complementary to the training practices. All these documents are supplied with a license purchase. Using the SERS™ document set in classroom study also promotes the real-world engine room best work practices of using manuals in operation and management of the engine room machinary and systems.
SERS User Manual Vol I (Software Description) describes the SERS software with the SERS Graphical User Interface (GUI) Panels accessed from the SERS Main Graphical User Interface (GUI) Panel.
SERS User Manual Volume II (Engine Room Operations) includes the operational instructions on how to operate the engine room systems and machinery using the SERS. The training institutions can directly use the contents of this manual in their training procedures. There are also exercises included for use by the trainees for reporting.
SERS User Manual Vol III (Installation & Configuration) describes the installation and the configuration of the software and hardware items. Using this manual, SERS can be configured to run as a Distributed System and the touch screen hardware panels can be assigned to desired GUI panels using the configuration files.
SERS User Manual Volume IV (Instructor’s Manual) includes guides, information, and additional exercise tips for the instructors to utilize SERS in their trainings according to a specific training objective.
Student Exercise Workbooks per IMO Model Course 2.07
Student Exercise Workbook, Volume I: We are already using the simulator in our own training programs and developed Volume I with exercies that meets each objectives of the IMO Model Course 2.07. Volume I exercises includes the Engine Room Operational Level training objectives.
Student Exercise Workbook,Volume II: Volume II exercises includes the Engine Room Management Level training objectives in accordance with IMO Model Course 2.07.
SERS Philosophy Document provides how SERS may be used in a curricula or in engine room simulator training programs. It provides guides for selecting the configuration of the SERS according to the training objectives.
Students can Complete and Report the IMO Model Course 2.07 Exercises with Online Training
IMO Model Course Engine-Room Simulator 2.07 (2017 Edition)
Operation of plant machinery 2.1. Operational procedures 2.2 Operate main and auxiliary machinery and systems 2.3. Operation of diesel generator 20 2.4. Operation of steam boiler 2.5. Operation of main engine and associated auxiliaries 2.6. Operation of steam turbo generator 2.7. Operation of fresh water generator 2.8. Operation of pumping system 2.9. Operation of oily water separator 2.10. Fault detection and measures
Maintain a safe engineering watch 19 3.1. Thorough knowledge of principles to be observed in keeping an engineering watch 3.2. Safety and emergency procedures; changeover of remote/automatic to local control of all systems 3.3. Safety precautions to be observed during a watch and immediate actions to be taken in the event of fire or accident, with particular reference to oil systems 3.4. Knowledge of engine room resource management principles
Operate electrical, electronic and control systems 4.1. Operation of main switch board 4.2. High-voltage installations
With our product, certified by the Nippon Kaiji Kyokai (Class NK) as a Class A (Full Mission) Engine Room Simulator, our purpose is to ensure that the instructors can efficiently utilize this training environment in their Maritime Education and Training (MET) programs and that the trainees can have a productive training.
Developed by GDS Engineering R&D; our product called Ship Engine Room Simulator (SERS);
Supports training programs using IMO Model Course 2.07 (2017 Edition).
Certified by Class NK for meeting both IMO STCW 2010 and Model Course 2.07.
The simulator is the digital twin model of a real ship (ref. to User Manuals for complete references and details)
Configurable for an individual training study on a Workstation/PC
Configurable for group studies with distributed system configuration using distributed computers and large touch-screen panels as well as association of hardware consoles and panels.
Provides automated training reports.
Includes high voltage training functions
Simulates all engine room machinery and systems with over 50 Graphical User Interface (GUI) Panels.
All systems are interfaced with all engine room parameters, any change in any parts of the systems is immediately affect the other systems, as in reality!
Emphasizes all aspects of the electrical operations with realistic functions.
Easy graphical user interfaces that considerably decrease the time for learning and allowing instructors to directly move on to the training objectives.
Includes 5 User Manuals, allowing to apply the manuals to training programs directly.
Includes Exercise Workbooks for students to come to the simulator center with their study books. When books and user manuals are incorporated, it provides a similar work studies in real ships.
Exercise Book I is to use in the Operational Level of STCW 2010 training / competency levels. There are more than 10 example exercises are provided; already meeting the STCW objectives.
Exercise Book II is to use in the Management Level of STCW 2010 training/ competency levels. There are more than 10 example exercises are provided; already meeting the STCW objectives.
Engine room systems are simulated with high resolution rendered components providing easily readable GUIs on screens, which considerably decrease the learning time and moving on to the training subjects.
For more information, clisk here to read the details of the GDS ERS in our ERS product page. https://www.globaldynamicsystems.com/
or watch our YOUTUBE CHANNEL for more information with some example videos.