TÜBİTAK Projesi ile Dalga Enerjisinden Elektrik Üretilecek

AQUA VISION ENERGY firması tarafından TÜBİTAK projesi olarak geliştirilen “Açık Deniz ve Okyanus Dalga Enerjisi Dönüştürücü Sistemin Geliştirilmesi ve Prototip Üretimi” adlı çalışmada sona gelindi.

TÜBİTAK desteği ile off-shore (açık deniz) dalga jeneratörü geliştiren Sayın Gemi Makineleri İşletme Mühendisi Özer Çakır’ın cihazının ileri testleri İstanbul Teknik Üniversitesi Denizcilik Test Uygulama ve Araştırma Merkezi (İTÜ DETAM) Tuzla yerleşkesinde gerçekleştirildi. Teknolojinin 2 yıl içerisinde ticari kullanıma girebileceği bilgisini veren Çakır, geliştirdiği teknolojinin dünyadaki rakiplerine kıyasla çok daha kısa sürede kendini amorti edebileceği bilgisini verdi.

Aqua Vision - Deniz Dalgasından Elektrik Enerjisi Üretimi Özer Çakır
Dalga Enerjisi
İTÜ Denizcilik Fakültesi
Marine Equipment Test Center
İTÜ Denizcilik Test Uygulama ve Araştırma Merkezi (İTÜ DETAM)
İTÜ Denizcilik Fakültesi’de Aqua Vizyon Enerji sistemininin testlerine başlangı. görüntüsü.

25 yıldır okyanus aşırı taşımacılık yapan gemilerde baş mühendis olarak çalışan, Gemi Makineleri İşletme Mühendisi Özer Çakır, dalga enerjisini elektrik enerjisine çeviren bir teknoloji geliştirdi.

Sabah gazetisine röpörtaj veren Özer Çakır, “Dalga enerji yoğunluğu rüzgara göre 2 kat, güneş enerjisine göre 10 kat daha yoğundur. Rüzgar ve güneş enerjisi yıllık kullanım oranı yüzde 30-35 iken yılda ortalama 120-130 gün yararlanılabilir. Dalga enerjisinin yıllık kullanım oranı yüzde 80-90 olup yılda ortalama 300-320 gün yararlanılabilir. Enerji halısı adını verdiğimiz sistemimiz, çalışma döngüsünde emisyon üretmez, ürettiği 13 KWH enerji için çevreye 1 ağacın bir günlük katkısına eş değer katkı sağlar. Enerji halısı 1 KW enerji için güneş panellerine göre onda 1, rüzgar türbinlerine göre de onda 5 oranında daha az bir alana ihtiyaç duyar” dedi. 11.11.2021 tarihli SABAH gazetesi haberi için tıklayınız.

MAVİ VATANDAN ENERJİ ALABİLİRİZ

Dalga enerjisinin rüzgar ve güneş enerjisine nazaran çok daha yoğun bir potansiyele sahip olduğunu belirten Çakır, “Ülkemizde yerleşim alanlarının dışında kalan 1652 kilometrelik sahil şeridinde ve kendi karasularımızda, mavi vatan sathında, yerli ve milli bir tasarım ile geliştirilen çevrim sistemimiz, kendi denizlerimizdeki enerjiyi kullanılabilir hale getirecektir.

Ozer Cakır Gemi Makineleri İşletme Mühendisi Aqua Vision Energy GDS Engineering R&D
Gemi Makineleri İşletme Mühendisi Özer Çakır

Gemi Makineleri İşletme Mühendisi Özer Çakır‘ın AQUA VİZYON ENERJİ firmasındaki bu çalışmasına;

Gemi Makineleri İşletme Mühendisi Adem Güleryüz dayanımlı mekanik üretimler, entegrasyon ve testler konusunda,

Elk. Elektronik Müh. Serkan Sezen ve Fuat Kılıç, sistem elektrik ve kontrol konularında,

Gemi Makineleri İşletme Mühendisi Doç. Dr. Alper Kılıç, deniz yapıları konusunda, ve

İTÜ Öğretim Üyesi ve İTÜ DETAM Merkez Müdürü Dr. İsmail Çiçek, optimizasyon ve verim konularında

projeye destek vermişlerdir.

Özer Çakır Bey’i başarısından dolayı tebrik eder, sanayi uygulamalarına örnek olması ve projenin başarılı bir şekilde hayata geçirilmesini dileriz.

Dr. İsmail Çiçek, İTÜ DETAM, Merkez Müdürü
İTÜ Denizcilik Fakültesi kampsündeki testler esnasında bir görüntü

PROJE KÜNYESİ

  • Proje Adı: Açık Deniz ve Okyanus Dalga Enerjisi Dönüştürücü Sistemin Geliştirilmesi ve Prototip Üretimi
  • Proje Türü: TÜBİTAK Projesi (1507), 2020-2021
  • Proje Yürütücüsü: Özer Çakır, Gemi Makineleri İşletme Mühendisi

PROJE ÖZETİ

Dalga enerjisi rüzgar ve güneş enerjisine nazaran çok daha yoğun bir potansiyele sahiptir. Ülkemizdeki dalga enerjisi potansiyeli kullanımı ile, yerleşim alanlarının dışında kalan 1652 kilometrelik sahil şeridi ve karasularımızda, mavi vatan sathında, yerli ve milli bir tasarım ile geliştirilen çevrim sistemi, Türkiye denizlerimizdeki enerjiyi kullanılabilir hale getirecektir.

Fikir, Proje Yürütücüsü Gemi Makineleri İşletme Mühendisi Sayın Özer Çakır tarafaından düşünülmüş ve projeye dönüştürülmüştür. Proje ile önerilen teknoloji dünyadaki rakiplerine kıyasla daha avantajlı olup sistemin öncelikle kendi sektöründeki diğer sistemlerin amorti süreleri ile karşılaştırması yaılacaktır. Sektörde kendini en kısa sürede amorti eden sistem yaklaşık 12 yıl ile Oscillating Water Columns olup diğer sistemler için bu süre daha da fazladır. Bu sistem ise 7-8 yıllık bir sürede kendini amorti edebileceği şekilde tasarlanıp optimize edilmiştir.

Rakiplerinden farklı olarak sistem, deniz yüzeyinde dalgaların gücüne ve hareketlerine bir arayüz olarak kullanılmış, bu arayüz sayesinde dalga enerjinin döngüsü sağlanmıştır. Yüzey üzerindeki tüm dalga etkileri az kayıp ile enerjiye çevirebilebilmesi için optimizasyon çalışması yapılmış, dönüştürebilen enerji miktarı rakiplerden daha fazla olduğu gösterilmiştir. Sistemi oluşturan malzeme maliyetlerinin düşük olması, sistemin toplam kurulum maliyetini de rakiplerine göre avantajlı hale getirmiştir. Sistemin tasarımsal özelliği sayesinde beklenmedik dalga etkilerine karşı dayanımlı olması istikrarlı ve düzenli çalışması sağlanmıştır. Ayrıcai diğer enerji kayaklarına bakıldığında, güneş pilleri için amorti süresinin 5 yıl civarında, rüzgar türbinleri için ise 7 yıl civarında olduğu düşünülerek çalışılmıştır.

Global Dynamic Systems. GDS Systems Engineering Training Programs. Simulators. Engine Room Simulator (ERS). Ship. Electrical Systems Simulator. Physics Lab. UH60. Amphibious. Ground Vehicles. Military Training Programs. MIL-STD-810H Online Training. Environmental Testing of Military Products. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Ship Engine Room Simulator (ERS) SERS GDS Engineering R&D IMO STCW 2010, Engine Performance, Main Diesel Engine, Marine, Maritime, IMO Model Course 2.07. Certified by Class NK. ITU Maritime Faculty. Yıldız Technical University. Competencies. Operation and Management Level. Education and Training. Assessment of Marine Engineers. Troubleshooting with Fault Tree Scnearious and Analysis Reporting. Maritime. Marine Engineering. San Antonio, Texas, Dayton, OH. WPAFB.

Learn about the Global Dynamic Systems (GDS) / GDS Engineering R&D, Inc. Products and Services

Global Dynamic Systems

(GDS Engineering R&D | GDS)

Established in 2014, GDS Engineering R&D offers products and services to the transporation industry.

The vision of GDS started earlier than 2014. Our personnel has been providing engineering services in various defense programs and projects and educational services since 1997. GDS was first estblised in San Antonio, Texas in 2008, the headquarters was then moved to Istanbul, Turkey in 2014.

Established by Dr Ismail Cicek, GDS now provides engineering services and products to the industry with a small team of engineers and managers of seven (7), academic consultants or part time subject matter experts (SMEs) of more than 10, and part-time associated students of five (5).

We provide international educational services, test support, or deliver products in various locations in the world, including the main office located in Istanbul, Turkey.

Our main product is Engine Room Simulator (ERS). All of our products are listed in summary here.
Our main services are training and consultancy services on environmental qualification test standards, such as MIL-STD-810H and RTCA-DO-160G.


MODERN IMO STCW TRAINING SIMULATORS

Ship Engine Room Simulator (ERS) SERS GDS Engineering R&D IMO STCW 2010, Engine Performance, Main Diesel Engine, Marine, Maritime, IMO Model Course 2.07. Certified by ClassNK. ITU Maritime Faculty. Yıldız Technical University. Competencies. Operation and Management Level. Education and Training. Assessment of Marine Engineers. Troubleshooting with Fault Tree Scnearious and Analysis Reporting. Objective Assessment. Nippon Kaiji Kyokai.

We develop and provide engine room simulator to the maritime schools, institutions, and companies. Our modern and effective Engine Room Simulator (ERS), certified by ClassNK in 2020, is already in use by many institutions around the world. Click here to read more about the GDS simulator products. Our simulator development story involves the collaborations with universities, industrial firms and governmental or non-governmental organizations.

Maritime Simulator Products

GDS provides Ship Engine Room Simulator product called SERS.
Ship Engine Room Simulator
(SERSTM)

SERSTM is a certified, advanced, and Full Mission engine room simulator that can be used in both laboratory and distributed team environment training.
Click to read more about SERSTM.

GDS Ship Electrical Systems Sİmulator, Engine oom Simulator ERS Distributed System Full mission Panels
Ship Electrical Systems Simulator (SESSTM)

SESSTM is a software simulation of all electrical systems in a typical engine room. It can be used as a laboratory software or in-class demonstration software.
Click to read more about SESSTM.

GDS Ship High Voltage Simulator Sample Screen View IMO Model Course
Ship High Voltage Training Simulator (HVTSTM)

HVTSTM is a software, which can be used in the training of high voltage operations onboard a ship, such as Vacuum Circuit Breaker, Transformer, and high power loading to the main bus.
Click to read more about HVTSTM.

GDS provides Virtual Physics Labs Product called VPL.
Virtual Physics Labs
(VPLTM)

VPLTM is software, which supports the laboratory sessions of Physics I and and II experiements, which are mechanical and electrical experiments, respectively.
Click to read more about VPLTM sotware.

ENVIRONMENTAL TEST TRAINING FOR YOUR SUCCESS!

With years of experience in developing defence and aviations systems and environmental test experience, GDS provides training on defense, aviation, and industry test standards. Click here to read more about the details of the systems engineering and test training subjects.

Mitigate your risks before they actually happen MIL-STD-810H Training STD-461 RTCA-DO-160G (1)

Training Programs
Systems Engineering | Online or Onsite | International

GDS provides MIL-STD-810H training, online or onsite.
MIL-STD-810H training program emphesizes the tailoring methodologies for qualification testing of specific military equipment and products.
Click to read more about MIL-STD-810 training program.
GDS provides RTCA-DO-160G 
training program. Two and a half days of focused training on environmental and EMI/EMC qualification testing of airborne equipment.
RTCA-DO-160G training program provides two and a half days of focused training on environmental and EMI/EMC qualification testing of airborne equipment.
Click to read more about DO-160 training.
GDS provides MIL-STD-461G and MIL-STD-464D training, online or onsite.
MIL-STD-461G training program includes the selection of test methods for platforms, test requirements (w/MIL-STD-464), test procedures, test report reviews, design ideas, and test process.
Click to read more about MIL-STD-461G training.
GDS Systems Engineering Training Programs Banner
GDS provides other training programs, including:
– MIL-STD-704F
– Req. Management
– Project Management
Click to display information about all of our training courses.

ENVIRONMENTAL TEST, ANALYSIS AND SUPPORT SERVICES

We also provide environmental testing services including the testing of your products to MIL-STD-810H, RTCA-DO-160G, and other military and industry standards. Some of which are vibrations, mechanical shock, low/high temperature, humidity, corrosion (salt spray, salt fog), and drop. We can help reduce your final issues in your product development through experience sharing, testing, or analysis.

Online Training on MIL-STD-810H, RTCA-DO-160, MIL-STD-461G, MIL-STD-704 Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Training Led by a Live US-based Sr. Instructor: Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. FAA Requirements Management. Efficient way of learning. Continues Education. Class Material.

We aim to support your business goals in the advancement of the human prosperity and healthy living.

GDS TEAM

We also prodive support to the industrial organisations in their product development or research projects by means of training, consultacies or services.

Our capabilities in desing and engineering solution projects, are, in summary:

  • Online Training Courses: We provide online training courses on Systems Engineering related topics, such as MIL-STD-810H Product Testing, RTCA-DO-160G Product Testing, MIL-STD-461G EMI/EMC Testing.
  • Mechanical Design: Solid modeling, parts and components desing, system design (i.e., engine parts, pipes, etc) engineering system design (cooling system, hyraulic/pneumatic systems, geabox design, etc.), surface modeling, and so on.
  • Engineering Analysis: Computational Fluid Dynamics (CFD), Thermodynamics, Heat Transfer, Finite Element Analysis, Fluid-Structure Interaction, Vibration, Shock, and Sound Analysis, Impact Analysis, etc.
  • System Simulations: Our firm is developing engine simulators, in which both diesel engine processes and systems and subsystems (turbocharger, air cooler, manifolds, etc.) are modeled and simulated.
  • Use of the Ship Engine Room Simulator:  Our engine room simulator is complete for educational use. However, it also has high level of research capabilities for use by ship operating agencies for testing and understanding their systems’ behaviors. Our simulator is basically a “twin modal” of your container type ship.
  • Machine Learning: With a through study of your plant parameters, we can propose and develop useful periodic reports on how to manage your systems better with problems arising before they actually occur.

GDS Engineering has the infrastructure, knowledge, personnel, and infrastructure and has taken part in international projects or to led projects. GDS has its own Project Management System (GDS-PMS) as well as Quality Management System (GDS-QMS) that help produce various tools and templates for use in project or quality management including risk-based management methods.

Training Registration Request Form

Please fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs.

    Our firm, consisting of PhDs, senior engineers, and highly skilled managers, are experienced in all phases of product development and project management; requirements, research, planning, design, analysis, testing, certification, and personnel training.  We provide engineering and services for your success in your project and company goals.

    We utilize engineering software and tools depending on the Project requirements, when needed, for example: -3D CAD and CAM packages: AutoCAD, SolidWorks, Autodesk Inventor -Engineering Analysis and Optimization: ANSYS Fluent and ANSYS Packages, Autodesk Inventor -System Simulation: CATIA -GT-Power Engine Analysis and Simulation Software – SIL and HIL Simulations -LSTC LS Dyna -National Instruments LabVIEW, LabVIEW RT and NI DAQ/Control Hardware -Matlab, C/C++, and other software when needed.

    We also develop our own engineering modeling and analysis programs. For example, we have our mathematical models developed for the analysis and simulation of diesel engines. This module helps testing of diesel engines and comparing the results against the simulated baseline system.

    Energy Management in Marine Engineering: We understand and can model your marine engineering platform for identifying the deficiences for energy management for your cost saving.