Global Dynamic Systems. GDS Systems Engineering Training Programs. Simulators. Engine Room Simulator (ERS). Ship. Electrical Systems Simulator. Physics Lab. UH60. Amphibious. Ground Vehicles. Military Training Programs. MIL-STD-810H Online Training. Environmental Testing of Military Products. Training helps reduce your design and operational risks. We provide MIL-STD-810H, RTCA-DO-160, Vibration and Shock, FAA Requirements Management courses. by Dr Ismail Cicek and a CVE certified by EASA. Ship Engine Room Simulator (ERS) SERS GDS Engineering R&D IMO STCW 2010, Engine Performance, Main Diesel Engine, Marine, Maritime, IMO Model Course 2.07. Certified by Class NK. ITU Maritime Faculty. Yıldız Technical University. Competencies. Operation and Management Level. Education and Training. Assessment of Marine Engineers. Troubleshooting with Fault Tree Scnearious and Analysis Reporting. Maritime. Marine Engineering. San Antonio, Texas, Dayton, OH. WPAFB.

Learn about the Global Dynamic Systems (GDS) / GDS Engineering R&D, Inc. Products and Services

Global Dynamic Systems

(GDS Engineering R&D | GDS)

Established in 2014, GDS Engineering R&D offers products and services to the transporation industry.

The vision of GDS started earlier than 2014. Our personnel has been providing engineering services in various defense programs and projects and educational services since 1997. GDS was first estblised in San Antonio, Texas in 2008, the headquarters was then moved to Istanbul, Turkey in 2014.

Established by Dr Ismail Cicek, GDS now provides engineering services and products to the industry with a small team of engineers and managers of seven (7), academic consultants or part time subject matter experts (SMEs) of more than 10, and part-time associated students of five (5).

We provide international educational services, test support, or deliver products in various locations in the world, including the main office located in Istanbul, Turkey.

Our main product is Engine Room Simulator (ERS). All of our products are listed in summary here.
Our main services are training and consultancy services on environmental qualification test standards, such as MIL-STD-810H and RTCA-DO-160G.


MODERN IMO STCW TRAINING SIMULATORS

Ship Engine Room Simulator (ERS) SERS GDS Engineering R&D IMO STCW 2010, Engine Performance, Main Diesel Engine, Marine, Maritime, IMO Model Course 2.07. Certified by ClassNK. ITU Maritime Faculty. Yıldız Technical University. Competencies. Operation and Management Level. Education and Training. Assessment of Marine Engineers. Troubleshooting with Fault Tree Scnearious and Analysis Reporting. Objective Assessment. Nippon Kaiji Kyokai.

We develop and provide engine room simulator to the maritime schools, institutions, and companies. Our modern and effective Engine Room Simulator (ERS), certified by ClassNK in 2020, is already in use by many institutions around the world. Click here to read more about the GDS simulator products. Our simulator development story involves the collaborations with universities, industrial firms and governmental or non-governmental organizations.

Maritime Simulator Products

GDS provides Ship Engine Room Simulator product called SERS.
Ship Engine Room Simulator
(SERSTM)

SERSTM is a certified, advanced, and Full Mission engine room simulator that can be used in both laboratory and distributed team environment training.
Click to read more about SERSTM.

GDS Ship Electrical Systems Sİmulator, Engine oom Simulator ERS Distributed System Full mission Panels
Ship Electrical Systems Simulator (SESSTM)

SESSTM is a software simulation of all electrical systems in a typical engine room. It can be used as a laboratory software or in-class demonstration software.
Click to read more about SESSTM.

GDS Ship High Voltage Simulator Sample Screen View IMO Model Course
Ship High Voltage Training Simulator (HVTSTM)

HVTSTM is a software, which can be used in the training of high voltage operations onboard a ship, such as Vacuum Circuit Breaker, Transformer, and high power loading to the main bus.
Click to read more about HVTSTM.

GDS provides Virtual Physics Labs Product called VPL.
Virtual Physics Labs
(VPLTM)

VPLTM is software, which supports the laboratory sessions of Physics I and and II experiements, which are mechanical and electrical experiments, respectively.
Click to read more about VPLTM sotware.

ENVIRONMENTAL TEST TRAINING FOR YOUR SUCCESS!

With years of experience in developing defence and aviations systems and environmental test experience, GDS provides training on defense, aviation, and industry test standards. Click here to read more about the details of the systems engineering and test training subjects.

Mitigate your risks before they actually happen MIL-STD-810H Training STD-461 RTCA-DO-160G (1)

Training Programs
Systems Engineering | Online or Onsite | International

GDS provides MIL-STD-810H training, online or onsite.
MIL-STD-810H training program emphesizes the tailoring methodologies for qualification testing of specific military equipment and products.
Click to read more about MIL-STD-810 training program.
GDS provides RTCA-DO-160G 
training program. Two and a half days of focused training on environmental and EMI/EMC qualification testing of airborne equipment.
RTCA-DO-160G training program provides two and a half days of focused training on environmental and EMI/EMC qualification testing of airborne equipment.
Click to read more about DO-160 training.
GDS provides MIL-STD-461G and MIL-STD-464D training, online or onsite.
MIL-STD-461G training program includes the selection of test methods for platforms, test requirements (w/MIL-STD-464), test procedures, test report reviews, design ideas, and test process.
Click to read more about MIL-STD-461G training.
GDS Systems Engineering Training Programs Banner
GDS provides other training programs, including:
– MIL-STD-704F
– Req. Management
– Project Management
Click to display information about all of our training courses.

ENVIRONMENTAL TEST, ANALYSIS AND SUPPORT SERVICES

We also provide environmental testing services including the testing of your products to MIL-STD-810H, RTCA-DO-160G, and other military and industry standards. Some of which are vibrations, mechanical shock, low/high temperature, humidity, corrosion (salt spray, salt fog), and drop. We can help reduce your final issues in your product development through experience sharing, testing, or analysis.

Online Training on MIL-STD-810H, RTCA-DO-160, MIL-STD-461G, MIL-STD-704 Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Training Led by a Live US-based Sr. Instructor: Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. FAA Requirements Management. Efficient way of learning. Continues Education. Class Material.

We aim to support your business goals in the advancement of the human prosperity and healthy living.

GDS TEAM

We also prodive support to the industrial organisations in their product development or research projects by means of training, consultacies or services.

Our capabilities in desing and engineering solution projects, are, in summary:

  • Online Training Courses: We provide online training courses on Systems Engineering related topics, such as MIL-STD-810H Product Testing, RTCA-DO-160G Product Testing, MIL-STD-461G EMI/EMC Testing.
  • Mechanical Design: Solid modeling, parts and components desing, system design (i.e., engine parts, pipes, etc) engineering system design (cooling system, hyraulic/pneumatic systems, geabox design, etc.), surface modeling, and so on.
  • Engineering Analysis: Computational Fluid Dynamics (CFD), Thermodynamics, Heat Transfer, Finite Element Analysis, Fluid-Structure Interaction, Vibration, Shock, and Sound Analysis, Impact Analysis, etc.
  • System Simulations: Our firm is developing engine simulators, in which both diesel engine processes and systems and subsystems (turbocharger, air cooler, manifolds, etc.) are modeled and simulated.
  • Use of the Ship Engine Room Simulator:  Our engine room simulator is complete for educational use. However, it also has high level of research capabilities for use by ship operating agencies for testing and understanding their systems’ behaviors. Our simulator is basically a “twin modal” of your container type ship.
  • Machine Learning: With a through study of your plant parameters, we can propose and develop useful periodic reports on how to manage your systems better with problems arising before they actually occur.

GDS Engineering has the infrastructure, knowledge, personnel, and infrastructure and has taken part in international projects or to led projects. GDS has its own Project Management System (GDS-PMS) as well as Quality Management System (GDS-QMS) that help produce various tools and templates for use in project or quality management including risk-based management methods.

Training Registration Request Form

Please fill out the following form for asking your question or with a registration request. Thank you for your interest in our training programs.

    Our firm, consisting of PhDs, senior engineers, and highly skilled managers, are experienced in all phases of product development and project management; requirements, research, planning, design, analysis, testing, certification, and personnel training.  We provide engineering and services for your success in your project and company goals.

    We utilize engineering software and tools depending on the Project requirements, when needed, for example: -3D CAD and CAM packages: AutoCAD, SolidWorks, Autodesk Inventor -Engineering Analysis and Optimization: ANSYS Fluent and ANSYS Packages, Autodesk Inventor -System Simulation: CATIA -GT-Power Engine Analysis and Simulation Software – SIL and HIL Simulations -LSTC LS Dyna -National Instruments LabVIEW, LabVIEW RT and NI DAQ/Control Hardware -Matlab, C/C++, and other software when needed.

    We also develop our own engineering modeling and analysis programs. For example, we have our mathematical models developed for the analysis and simulation of diesel engines. This module helps testing of diesel engines and comparing the results against the simulated baseline system.

    Energy Management in Marine Engineering: We understand and can model your marine engineering platform for identifying the deficiences for energy management for your cost saving.

    Group training on “MIL-STD-810H testing” might be a better option?

    A Group Training Might be a Good Option for your Organization?

    • Training can be customized to your organizational needs. In such cases, training could emphasize selected topics in more details with additional discussions and Qs & As.
    • Group trainings of 10 or more adds no additional cost.
    • Group trainings of 15 or more, discounts will apply.
    • Maximum training class size is 20 in order to ensure the efficiency of the training.

    About the Training on MIL-STD-810H Testing:

    A Hands-on “Online” or “Onsite” Training Class
    Led by a live, U.S. based instructor

    MIL-STD-810H
    Department Of Defence Test Method Standard
    Environmental Engineering Considerations and Laboratory Tests

    Training Scope and Contents:

    • A good understanding of product testing in view of MIL-STD-810G/H and other relevant military standards.
    • Overview of Systems Engineering, V&V, and Concepts of Operations (CONOPS) document.
    • Establishment of Test Requirements and Test Plans.
    • Test Procedures, Scheduling, Implementation, and Test Reports.
    • Tests are covered in detail per MIL-STD-810. Altitude, temperature, humidity, shock, vibration, acceleration, salt fog, explosive atmosphere, etc..
    • Some tests MIL-STD-810H tests are covered briefly; however, we ensure all questions are answered in each topic.
    • Cases studies, sample reports and discussions on issues.
    • Design issues and test failure discussions.
    • Risk management for test results and acceptance criteria.
    • Design Recommendations.

    Platform and equipment test examples are provided in each test method presentations and discussions, including:

    • Military aircraft platforms (fixed and rotary wing), ground vehicles, and navy ships
    • Avionics, electrical and mechanical systems, and structural project applications
    • Test tailoring examples to include the selection of tests, parameter levels, and durations
    • Concepts of Operations (CONOPS) document and test curve establishment.
    • Tailoring and Life Cycle Environmental Profile (LCEP)

    Method and Schedule of the Training Class:

    • Online training using ZOOM
    • Led by a live, U.S. based instructor (Dr Ismail Cicek)
    • 2.5 days of training
      • 1st Day: 08:00 – 16:00 (Lunch Break between 11:30 and 12:30)
      • 2nd Day: 08:00 – 16:00 (Lunch Break between 11:30 and 12:30)
      • 3rd Day: 08:00 – 12:00
      • Time zone: Central European Time (CET)
    • Registration includes all presentations and additional material shared before the class.
    • Attendees will receive a Training Certificate.
    • Training includes knowledge check quizzes, a competition type fun way or learning.

    How to Register:

    Send your training/registration requests or specific questions
    to our Training Contact Person
    @
    info@GlobalDynamicSystems.com or aozdemir@tr-test.com.tr
    +90 (537) 210-4068 | +90 (312) 923 99 99

    About Trainer:

    Training is provided by Dr Ismail Cicek with several assistance from personnel experienced in MIL-STD-810 testing.

    Dr. Cicek studied PhD in Mechanical Engineering Department at Texas Tech University in Texas, USA. He study included random vibration. He has both industrial and academic experience for over 30 years.

    He gained engineering and leadership experience in the United States Department of Defence projects and programs as systems development engineer about 15 years. He led the development of various engineering systems for platforms including C-5, C-17, KC-10, KC-135, and C-130 E/H/J.  Dr. Cicek’s experience includes unmanned aerial vehicle development where he utilized the Geographical Information Systems (GIS) and Malfunction Data Recorder Analysis Recorder System (MADARS) development for military transport aircraft.

    Dr Cicek worked as the lab chief engineer for five years at the US Air Force Aeromedical Test Lab at WPAFB/OH. He received many important awards at the positions he served, due to the excellent team-work and his detail oriented and energetic personality.  These included Terra Health’s Superior Client Award in 2009 and Engineering Excellence Award in 2010 as well as an appreciation letter from the US Air Force Aeronautical Systems Center (ASC), signed by the commander in charge.

    Dr Cicek also established a test lab, called Marine Equipment Test Center (METC) and located at Istanbul Technical University, Tuzla Campus, for testing of equipment per military and civilian standards, such as RTCA-DO-160. Providing engineering, consultancy, and training services to many companies and organizations, Dr. Cicek has gained a great insight into the tailoring of standard test methods in accordance with military standards, guides, and handbooks as well as Life Cycle Environmental Profile LCEP) developed for the equipment under test.

    Dr. Cicek also completed various product and research projects, funded in the USA, EU, and Turkey. He is currently teaching at Istanbul Technical University Maritime Faculty, Tuzla/Istanbul. He also manages the Marine Equipment Test Center in Tuzla Campus.

    This short training on MIL-STD-810H testing class will provide education in the purpose of each test (with emphasis on CONOPS and LCEP documents), the following:

    • Equipment required to perform
    • Selection of procedures
    • Correctly identifying test conditions
    • Test durations
    • The methodology to correctly apply the specified test environments

    Vibration test methods will be covered in detail with fundamental topics, such as sine, random, sine on random, dwell, and sweep testing. The trainer of the class has Ph.D. in mechanical engineering with PhD thesis study on random vibrations and he served in several test laboratories gaining hand on practice on military and aviation standards over the years.

    Shock and acceleration testing will be covered using MIL-STD-810 and additional material to cover the methods and selection of tests. Dr. Cicek has developed acceleration test process at US Air Force laboratory for certifying certain products per military standards for in-service use.

    More about Training Contents:

    MIL-STD-810H, Method 500.6 Low Pressure (Altitude)
    MIL-STD-810H, Method 501.7 High Temperature
    MIL-STD-810H, Method 502.7 Low Temperature
    MIL-STD-810H, Method 503.7 Temperature Shock
    MIL-STD-810H, Method 504.3 Contamination by Fluids
    MIL-STD-810H, Method 505.7 Solar Radiation (Sunshine)
    MIL-STD-810H, Method 506.6 Rain
    MIL-STD-810H, Method 507.6 Humidity
    MIL-STD-810H, Method 508.8 Fungus
    MIL-STD-810H, Method 509.7 Salt Fog
    MIL-STD-810H, Method 510.7 Sand and Dust
    MIL-STD-810H, Method 511.7 Explosive Atmosphere
    MIL-STD-810H, Method 512.6 Immersion
    MIL-STD-810H, Method 513.8 Acceleration
    MIL-STD-810H, Method 514.8 Vibration
    MIL-STD-810H, Method 515.8 Acoustic Noise
    MIL-STD-810H, Method 516.8 Shock
    MIL-STD-810H, Method 517.3 Pyroshock
    MIL-STD-810H, Method 518.2 Acidic Atmosphere
    MIL-STD-810H, Method 519.8 Gunfire Shock
    MIL-STD-810H, Method 520.5 Combined Environments
    MIL-STD-810H, Method 521.4 Icing/Freezing Rain
    MIL-STD-810H, Method 522.4 Ballistic Shock
    MIL-STD-810H, Method 523.4 Vibro-Acoustic/Temperature
    MIL-STD-810H, Method 524.1 Freeze / Thaw
    MIL-STD-810H, Method 525.2 Time Waveform Replication
    MIL-STD-810H, Method 526.2 Rail Impact
    MIL-STD-810H, Method 527.2 Multi-Exciter
    MIL-STD-810H, Method 528.1 Mechanical Vibrations of Shipboard Equipment (Type I – Environmental and Type II – Internally Excited)

    Relation with RTCA-DO-160 Explained:

    • Training will provide some comparison between military tests against the FAA/EASA certification test requirements covered in RTCA-DO-160.
    • For example, Fire Flammability will be covered in detail in this training.
    • Differences in some test procedures, for example, Altitude, Temperature, Water Proofness / Rain / Immersion, Humidity, Contamination by Fluids, Vibrations, Shock and Crash Accelerations, Icing Freezing, and Salt Fog, will be explained with rationale.
    • Demonstrating the differences between DO160 and 810 is a great way of understanding the tailoring process iaw MIL-STD-810H.

    Relation with Industrial and Other Military Standards Explained:

    • In some cases, MIL-STD-810H tests may not be enough; especially when additional specific material requirements are concerned.
    • Training covers a test standards session where examples from other military as well as industrial standards are explained briefly. This session provides an understanding into the rationale for choosing MIL-STD-810 test methods or other military/industrial standards.
    • For example, military or DO-60 Salt Fog test versus ASTM corrosion tests are explained with when and why you may need other tests.
    • Test plans usually include EMI/EMC test procedures. Training will provide a short session with a general overview of the MIL-STD-461 testing and how to select procedures for your equipment and platform.

    Emphasis Given into Tailoring:

    • Developing a test plan wrt MIL-STD-810 testing might be confusing and if not it is definitely a time consuming process.
    • Training will provide an understanding into why and when Concepts of Operations document is needed and how test requirements are established. This will be covered by both presentations and specific product examples in use in specific platforms.How to develop a Lifecycle Environmental Profile will be given by examples.In test method, discussion will cover “what items” and “how” they will be tailored.

    Who Should Attend?

    • Program Managers to understand the test scheduling and planning. Also, it is important for them to establish a “test review team”.
    • Technical Leads and Requirements Managers to understand how to write correct test requirements
    • Test personnel to learn how to implement the tests
    • Design teams to learn what to consider in their design to pass the testsPersonnel responsible for test plans
    • Decision makers to understand the strategy when choosing certain test procedures in their product life cycle planning for target platforms and for marketing.
    • All candidates of Systems Engineering professionals.

    We have provided Systems Engineering Training courses to more than 50 Organizations and over 200 individual trainees so far.

    Read More about this training:
    MIL-STD-810H Training Contents

    Use ERS Exercise Workbooks and Manuals in your Operational and Management Level Trainings: Students Love it!

    GDS Ship Engine Room Simulator (Ship ERS or SERS™)
    User Manuals and Exercise Workbooks

    Line Up - ME Fresh Water Cooling System IMO STCW 2010 Training, IMO Model Course 2.07. Prevent Maritime Accidents. Training is Important. Marine Engineering Training Products, Ship Engine Room Simulator, Ship ERS or simply the SERS, provided by GDS Engineering R&D.

    ERS User Manuals Set for Meeting IMO Model Course 2.07 (2017 Ed.) Exercise Objectives and STCW 2010 Training Requirements, Supplemented with Root Cause Analysis Exercises

    SERS™ is provided with a total of seven (7) user manuals, student exercise workbooks, and documents as complementary to the training practices. All these documents are supplied with a license purchase.

    SERS User Manual Vol I (Software Description) describes the SERS software with the SERS Graphical User Interface (GUI) Panels accessed from the SERS Main Graphical User Interface (GUI) Panel.

    SERS User Manual Volume II (Engine Room Operations) includes the operational instructions on how to operate the engine room systems and machinery using the SERS. The training institutions can directly use the contents of this manual in their training procedures. There are also exercises included for use by the trainees for reporting.

    SERS User Manual Vol III (Installation & Configuration) describes the installation and the configuration of the software and hardware items. Using this manual, SERS can be configured to run as a Distributed System and the touch screen hardware panels can be assigned to desired GUI panels using the configuration files.

    SERS User Manual Volume IV (Instructor’s Manual) includes guides, information, and additional exercise tips for the instructors to utilize SERS in their trainings according to a specific training objective.

    SERS Philosophy Document provides how SERS may be used in a curricula or in engine room simulator training programs. It provides guides for selecting the configuration of the SERS according to the training objectives.

    Student Exercise Workbooks per IMO Model Course 2.07 (2017 Version)

    Student Exercise Workbook, Volume I: We are already using the simulator in our own training programs and developed Volume I with exercies that meets each objectives of the IMO Model Course 2.07. Volume I exercises includes the Engine Room Operational Level training objectives.

    Student Exercise Workbook,Volume II: Volume II exercises includes the Engine Room Management Level training objectives in accordance with IMO Model Course 2.07.

    Using the SERS™ document set in classroom study also promotes the real-world engine room best work practices of using manuals in operation and management of the engine room machinery and systems.
    Visit the Ship ERS ( SERS™) product page for more information

    Need your ‘Marine Equipment’ be tested and certified?

    We provide testing and certification services at Istanbul Technical University Marine Equipment Test Center (METC)

    In all project test phases, starting from requirements to verification tests, unit tests, integration tests, environment tests, and final/acceptance testing, we can support you. We can plan and test mechanical products, electrical equipment and devices, composite and innovative materials/alloys, Hazardous Materials (HAZ-MAT) packaging, medical equipment, an many other type of products developed in field use in dynamic environments.

    We provide test and evaluation training
    at your location
    or
    at Istanbul Technical University (ITU) Maritime Faculty (ITMF) Campus

    in Tuzla, Istanbul.

    Online Training on MIL-STD-810H, RTCA-DO-160, MIL-STD-461G Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Training Led by a Live US-based Sr. Instructor: Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems.

    Our test center, Marine Equipment Test Center (METC) is located in Tuzla, Istanbul. METC provides accredited services for testing prototypes for harsh environments, such as temperature, humidity, drop, tensite, loading, inside pressure, corrosion, etc. We perform tests according to ISO 17025. We are experienced in developing proposals with verification and validation activities. Whether you are developing a device or a piece of software, we are experienced in developing test plans, procedures, and reports. In short we manage your test project wşth a due diligence.

    • Testing of Hazardous Material (HAZ-MAT) packages for transportation
      (Product testing per ADR Agreement)
    • Testing of Marine Equipment and Life Saving Equipment (LSA) (per IMO LSA Code)
    • Short Training Courses on Test Planning and Documents, Test Standarts, Testing and Test Management
      (Training on MIL-STD-810H, RTCA-DO-160G, MIL-STD-461G, and other standards)
    • Vibration and Shock testing.
    • Testing of military equipment per MIL-STD-810H (DOD/military test standards)
    • Testing of equipment per RTCA-DO-160G (aviation test standards per EASA / SHGM)
    • Tensile testing of metals, composites, alloys, straps, etc.
    • Surface roughness
    • Corrosion testing (MIL-STD-810H, RTCA-DO-160, and including the ASTM sample tests)
    • Static load testing

    Online Training on MIL-STD-810H, RTCA-DO-160, MIL-STD-461G, MIL-STD-704 Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Training Led by a Live US-based Sr. Instructor: Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained. How to evaluate test results and mitigate the risk (Risk Assessment Matrix). Aircafft Equipment, Devices, Plugs, Machinary, Engines, Compressors, or Carry-on. European CE Time Schedule. FAA Requirements Management. Efficient way of learning. Continues Education. Class Material.

    The manager of the METC facility, Dr. Ismail Cicek, have long years of testing experties since 2000s. MIL-STD-810G, RTCA-DO-160, ADR agreement for testing of hazardous packaging materias for transportation, Life Saving Appliances (LSA) Code are some of the standarts that we are experienced with and we do have the labratory with test infrastructure. Recently, testing of big HAZMAT packages (Internmediate Bulk Container, IBC) capability was added.

    Additionally, some verification activities can be done using analysis techniques. We can perform Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA), Fluid-Structure Interference (FSI) analysis in design stage for design verification and optimization.

    GLOBAL DYNAMIC SYSTEMS (GDS)
    TRAINING COURSES
    Worldwide, Online, for ‘Groups’ or ‘Individuals’

    Training on
    MIL-STD-810H
    ENVIRONMENTAL TESTING

    Training on
    EMI/EMC Testing
    (per RTCA-DO-160 & MIL-STD-461)

    Training on
    Vibration and Shock
    Testing

    Training on
    Systems Engineering
    (DoD/FAA/NASA/EASA)

    Training on
    RTCA-DO-160G
    ENVIRONMENTAL TESTING

    Training on
    MIL-STD-461G EMI/EMC Testing
    (incl. MIL-STD-464)

    Training on
    Requirements Management
    (FAA/EASA/US DoD/NASA)

    Training on
    MIL-STD-704F
    Aircraft Electrical Interface

    Online Training on MIL-STD-810H, RTCA-DO-160, MIL-STD-461G Environmental Testing of Products, provided by GDS Engineering R&D, Systems Engineering Products and Solutions. Training Led by a Live US-based Sr. Instructor: Dr. Ismail Cicek. Product Verification and Validation Courses for Integrated Systems. C-17 Military Aicraft. FAA/EASA. US DoD. Safety First. US Army. US Air Force and US Navy Tailoring Examples for Mission and Environmental Profile. Setting Test Limits and Durations are Explained.

    GDS Quality Management System (GDS-QMS)

    GDS Engineering has the infrastructure, knowledge, personnel, and infrastructure and has taken part in international projects or to led projects. GDS has its own Project Management System (GDS-PMS) as well as Quality Management System (GDS-QMS) that help produce various tools and templates for use in project or quality management including risk-based management methods.

    GDS Program Management System (PMS)

    GDS Engineering has the infrastructure, knowledge, personnel, and infrastructure and has taken part in international projects or to led projects. GDS has its own Project Management System (GDS-PMS) as well as Quality Management System (GDS-QMS) that help produce various tools and templates for use in project or quality management including risk-based management methods.